Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZWC1301
Summary of Contents for Zanussi ZWC1301
- Page 1 User Manual GETTING STARTED? EASY. ZWC1301 EN User Manual Washing Machine...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
staff kitchen areas in shops, offices and other working – environments; by clients in hotels, motels, bed & breakfast and other – residential type environments; areas for communal use in blocks of flats or in launderettes. – The appliance maximum load is 3 kg. Do not exceed the •... -
Page 4: Electrical Connection
• Make sure that there is air circulation between • When unpacking the appliance, It is possible to the appliance and the floor. see water flowing from the drain hose. This is • When the appliance is in its permanent position, due to the testing of the appliance with the use check if it is levelled correctly with the aid of a of water in the factory. -
Page 5: Product Description
springs, washing drum, drum spider and related • Disconnect the appliance from the mains ball bearings, heaters and heating elements, electrical and water supplies. including heat pumps, piping and related • Cut off the mains electrical cable close to the equipment including hoses, valves, filters and appliance and dispose of it. -
Page 6: Technical Data
The rating plate reports the model name (A) , product number (B), electrical ratings (C) and serial number (D). Mod. xxxxxxxxx Prod.No. 910000000 00 000V ~ 00Hz 0000 W 00000000 TECHNICAL DATA Dimension Width/ Height/ Total depth 50 cm /67 cm /55 cm Electrical connection Voltage 230-240 V... -
Page 7: Information For Installation
UNPACKING We recommend that you keep the packaging and the transit 1. Open the door. Remove all items from the bolts for any transport of the drum. appliance. 2. Put the packaging element on the floor behind the appliance and carefully put it down onto its 5. - Page 8 45º 45º 20º 20º Make sure that the plastic guide cannot move when the appliance drains and the drain hose end is not immersed in the water. There may be a 2. Position it toward left or right depending on the return of dirty water into the appliance.
- Page 9 ELECTRICAL CONNECTION 5. Without the plastic hose guide, to a sink spigot- Put the drain hose in the spigot and tighten it with a At the end of installation you can connect the mains clamp. Refer to the illustration. plug to the mains socket. The rating plate on the inner edge of the appliance door and the 'Technical Data' chapter indicate the necessary electrical ratings.
-
Page 10: Control Panel
CONTROL PANEL CONTROL PANEL DESCRIPTION Detergent drawer Delay Start button FlexiTime button Super Quick / Quick Programme progress indicators Prewash button SPIN reduction selector Extra Rinse button Programme selector dial Start/Pause button DIAL AND BUTTONS INTRODUCTION will be reduced according to the type of fabric and the selected temperature. -
Page 11: Programme Selector Dial
people who are allergic to detergents, and in areas The light A illuminates when the Delay Start is where the water is very soft. selected, start of the washing programme will be delayed for 8 hours. This option increases the programme The light B illuminates when the Delay Start is duration. - Page 12 Programme Spin speed Maximum Programme description Temperature range load (Type of load and level of soiling) range 900 rpm 1,5 kg Special programme for lightly soiled cotton, synthetic and mixed fabrics. Select this programme to reduce 20 °C the energy consumption. Make sure that the detergent is suitable for low temperature in order to have good washing results.
- Page 13 Programme ■ ■ ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ ■ ■ ■ ■ Wool ■ ■ ■ ■ Mini ■ ■ ■ ■ ■ Rinse Drain ■...
-
Page 14: Before First Use
BEFORE FIRST USE 1. Make sure that all transit bolts have been 5. Set and start a programme for cotton at the removed from the appliance. highest temperature without laundry. This 2. Connect the mains plug to the mains socket. removes all posssible dirt from the drum and 3. -
Page 15: Select The Delay Start
When you set a programme with prewash, put the detergent for prewashing phase directly into the drum. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). -
Page 16: Altering An Option Or A Running Programme
Cancelling the delayed start after having pressed new programme by pressing the button Start/ button Start/Pause: Pause again. 1. Set the washing machine to PAUSE by INTERRUPTING A PROGRAMME pressing button Start/Pause. 2. Press the button Delay Start once, the light Press the button Start/Pause to interrupt a relevant to the selected delay goes off. -
Page 17: Hints And Tips
Remove the laundry from the drum and carefully Leave the door open to prevent the formation of check that the drum is empty. If you do not intend mildew and unpleasant smells. to carry out another wash, close the water tap. HINTS AND TIPS THE LAUNDRY LOAD •... -
Page 18: Care And Cleaning
– there is large amounts of foam during helps to reduce energy and water washing. consumption. • When using detergent tabs or pods, always put • With adequate pre-treatment, stains and limited them inside the drum, not in the detergent soiling can be removed;... -
Page 19: Maintenance Wash
CAUTION! Do not use alcohol, solvents or chemical products. CAUTION! Do not use the metal surfaces with chlorine-based detergent. DESCALING If the water hardness in your area is high or moderate, we recommend that you use a water descaling product for washing machines. 2. -
Page 20: The Dangers Of Freezing
CLEANING THE INLET HOSE AND THE VALVE FILTER 45° 20° THE DANGERS OF FREEZING not go below the water level in the gully's (drain's) water tap. If the machine is exposed to temperatures below • Select the programme "Drain" and let it run until 0°C, certain precautions should be taken. -
Page 21: Possible Failures
POSSIBLE FAILURES Problem Possible cause/Solution The programme does • Make sure that the mains plug is connected to the mains socket. not start. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. •... -
Page 22: Consumption Values
Problem Possible cause/Solution Spinning starts late or • Add more items, redistribute the load manually and then select the appliance does not spinning programme. spin: No water is visible in • Appliances based on modern technology operate very economically the drum: using very little water without affecting performance. - Page 23 ACCORDING TO COMMISSION REGULATION EU 2019/2023 Eco 40-60 pro- Litres h:mm °C gramme Full load 0.634 2:40 1251 Half load Quarter load 1) Maximum spin speed. 2) Half load and quarter load are not declared and tested when the appliance has rated capacity lower or equal than 3kg.
-
Page 24: Environmental Concerns
Programme Litres h:mm °C Wool 0.33 1:00 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons. 4) It also performs as quick washing cycle for lightly soiled laundry. ENVIRONMENTAL CONCERNS with the symbol with the household waste. - Page 28 WWW.ZANUSSI.COM/SHOP...