Dell E2722H User Manual page 18

Electrical specifications
Model
Video input signals
AC input voltage/
frequency/current
Inrush current
Power consumption
As defined in EU 2019/2021 and EU 2019/2013.
1
Max brightness and contrast setting.
2
Pon: Power consumption of On mode as defined in Energy Star 8.0 version.
3
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
│
18 About your monitor
E2722H/E2722HS
HDMI 1.4, 600mV for each differential line,100 ohm
input impedance per differential pair(E2722HS only)
Analog RGB, 0.7 Volts +/-5%, positive polarity at 75
ohm input impedance
DP 1.2, 600 mV for each differential line, 100 ohm
input impedance per differential pair
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.5 A
120 V: 30 A (max.) at 0°C (cold start)
240 V: 60 A (max.) at 0°C (cold start)
0.3 W (Off mode)
0.3 W (Standby Mode)
17 W (On Mode)
1
30 W (Max.)
2
14.8 W (Pon)
3
47.09 kWh (TEC)
3
1
1