List Of Error/Message Codes - Canon PowerShot G6 User Manual

List of Error/Message Codes

The following error and message codes may appear on the display
panel.
Error Codes
: The camera has experienced a problem. Turn off the
(XX: number)
Message Codes
: Playing back image.
: Connected to computer in PC connection mode.
: Adequate battery charge.
: Low battery charge. Charge the battery as soon as possible to
use for any length of time.
: Battery charge low, camera will not operate. Immediately
recharge or replace the battery pack with a charged one.
: No CF card in camera, CF card/battery cover is open, or CF card
error.
: Power turned on while holding the lens. Turn power off and on
again.
: Intervalometer is set (shoots images automatically at set time
intervals). (The number of remaining shots display after the first
images is shot.)
power, wait a second, and then try shooting or playing
back. If the error code appears repeatedly, there is a
problem. Note the error code number and take the camera
in for servicing. If an error code appears immediately after
a shot, there is a chance that the image was not recorded.
Check the image in playback mode.
167