Important Safety Instructions; Appropriate Use; Technical And Electrical Safety - Miele PRI 210 Operating Instructions Manual

Read the operating instructions carefully before using the rotary iron. They contain im-
portant information on safety, installation, use, and maintenance.
To avoid the risk of accidents or damage, it is essential to read the operating instructions
before using the rotary iron for the first time.
If other persons are being shown how to operate the rotary iron, they must be given
and/or informed of these important safety instructions.
Miele cannot be held liable for injury or damage caused by non-compliance with these
instructions.
Keep these operating instructions in a safe place and pass them on to any future user.

Appropriate use

This rotary iron must be used as described in these instructions and must be checked on a
regular basis to make sure it is functioning correctly. Maintenance must be carried out
when necessary.

This rotary iron is only intended for ironing clean fabrics that were washed in water.
Check fabric care labels to verify that the articles are suitable for machine ironing.

This rotary iron is intended for use in commercial settings. The rotary iron is not intended
for domestic use. If the rotary iron is used in a publicly accessible place, it is the supervi-
sor's responsibility to ensure suitable measures are in place to protect users from any
source of risk or danger.

The rotary iron is not intended for outdoor use.

Technical and electrical safety


The rotary iron must not be operated in the same room as dry-cleaning equipment using
perchloroethylene or solvents containing CFCs.

The rotary iron may only be operated in a suitable dry room.

Only operate the rotary iron when all removable outer panels are in place so that it is im-
possible to touch an electrical component, moving part, or hot machine parts.

Do not damage, remove, or bypass the safety features or control elements of the rotary
iron.

Do not make any alterations to the rotary iron unless explicitly authorized to do so by
Miele.

If the control elements or the electrical cabling insulation has been damaged, the rotary
iron must not be used until such damage has been repaired.

Repairs should only be carried out by suitably qualified personnel. Incorrect repairs can
cause considerable danger to users.

Faulty components must only be replaced using genuine Miele parts. Miele can only
guarantee that the rotary iron fully complies with safety requirements if genuine Miele re-
placement parts are used.

The electrical safety of this rotary iron can only be guaranteed if it is correctly grounded.
It is essential that this standard safety requirement is observed and regularly tested. If in
any doubt, please have the electrical installation inspected by a qualified electrician. Miele
cannot be held liable for damages arising from an absent or faulty grounding connection.

IMPORTANT SAFETY INSTRUCTIONS

5