Automated Playback (Slide Show) - Canon PowerShot S50 User Manual

Automated Playback (Slide Show)

Slide show image settings are based on DPOF standards (p. 122).
Starting a Slide Show
All images, or a selection of images, can be displayed one-by-one in an automated slide show.
All Images
Slide Show 1 - 3
1
In the [
Show] and press
See Selecting Menus and Settings (p. 36).
2
Select [Program] using C or D on the
multicontroller. Then select between [All
Images] or one of [Show 1]-[Show 3] using
B or A on the multicontroller.
3
Select [Start] using C or D on the
multicontroller and press
The slide show will start and automatically stop when the show is done.
Pausing and Resuming a Slide Show
Press to pause the show. Press it again to resume.
Fast Forward / Rewinding a Slide Show
Use B or A on the multicontroller to move to the previous or next image.
Stopping a Slide Show
Press the
show menu.
4
When the slide show is over, press the
The slide show menu appears again. Press the
the menu.
• Movie images play for the length of time that they were recorded regardless of the
time set in the slide show settings.
• The power-saving function is disabled while a slide show plays on the camera (p. 25).
114
Plays all the images on the CF card in order
Plays the images selected for each show in order (p. 115)
(Replay)] menu, select [Slide
.
button during a slide show to stop it and display the slide
.
button again to close
button.