Connections - LG DKS-5550Q Owner's Manual

Connections

Tips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD Player is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.
Connecting to a TV
Video connection
1
Connect the VIDEO OUT jack on the DVD Player to
the video in jack on the TV using the video cable (V).
2 2
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
Rear of TV
AUDIO INPUT
L
R
A
Rear of
DVD player
6
Connecting to Optional Equipment
Connecting to an amplifier equipped with two
channel analog stereo
Connect the Left and Right AUDIO OUT jacks on the DVD
Player to the audio left and right in jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/ Video
receiver equipped with a multi-channel decoder
(Dolby Digital™ or MPEG 2)
Connect one of the DVD Player's DIGITAL OPTICAL OUT
jacks to the corresponding in jack on your amplifier. Use an
optional digital audio cable. (O)
A digital multi-channel connection provides the best sound
quality. For this you need a multi-channel Audio/Video
receiver that supports one or more of the audio formats
supported by your DVD Player (MPEG 2 va Dolby Digital).
Check the receiver manual and the logos on the front of
the receiver.
Due to the DTS Licensing agreement, the digital output will
be in DTS digital out when DTS audio stream is selected.
VIDEO
INPUT
V
– If the audio format of the digital output does not match
– Six Channel Digital Surround Sound via digital con-
– To see the audio format of the current DVD in the on-
Digital Multi-channel sound
Caution:
Rear of DVD player
O A
OPTICAL
DIGITAL INPUT
Amplifier (Receiver)
Notes
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
screen display, press AUDIO.
R L
AUDIO INPUT