GE A II Series Manual page 4

Figure 3. Attaching the shield insert to the shield for TEY breaker installation in
12. If TEY breakers has to be installed after SG or SF/TFJ or SE/TED/TQD as shown
in Figure 4 then gap between the breakers (dim A) has to be followed as
mentioned in Table 2. Replace the subsequent blank filler of dead front with TEY
filler plate given in kit ASPP6EY6D using steps 9 to 11.
13. If TEY breaker has to installed immediate after crossbar as shown in Figure 5
then gap between the breaker and crossbar has to be 0.06inch.
DEH40157
®
A-Series II Panelboards.
4
DEH40157
Rev.No.01