Quick Start - Canon PowerShot SD100 User Manual

Quick Start

Quick Start
Charge Indicator
Battery Lock
Power Lamp
14
Charge the Battery Pack (p. 21)
1
Charge the battery pack using the supplied
battery charger. The charging is complete
when the charge indicator turns from
orange to green.
Install the Battery Pack (p. 23)
2
Slide the SD card slot/battery cover open
and press the battery lock while you insert
the battery pack.
Install the SD Card (p. 25)
3
Back
• Insert the SD card as shown on the
bottom of the camera until you hear it
click into place.
Terminals
• Do not touch or allow metal objects to
contact the terminals.
Turn the mode switch to
4
(p. 20)
Turn on the power (p. 32)
5
Press the ON/OFF button until the power
lamp lights.
(Auto)