Usb Device; Recording From A Disc Onto An Usb Device - Sony MHC-GTX88 Operating Instructions Manual

USB Device

Recording from a disc
onto an USB device
You can record music from a disc to an
optional USB device (Digital music
player or USB storage media) by
connecting it to the
the unit.
You can record from an AUDIO CD or
MP3 disc only. The audio format recorded
by this system is MP3. The approximate
size of the recording from an AUDIO CD
is about 1 MB per minute of recording
time.
See "Playable/Recordable USB devices"
(page 5) for a list of USB devices that
can be connected to this system.
Note
The tracks those are recorded onto the USB
device is for personal use only.
There are two ways to record a disc onto
an USB device.
CD-USB Synchro Recording:
You can easily record an entire disc onto
an USB device.
REC1 Recording:
You can easily record a single track that is
currently being played back onto an USB
device.
1
Connect a recordable USB
device to the
the unit.
22 GB
(USB) port on
(USB) port on
USB device
(Digital music player or
USB storage media)
2
Prepare the recording source.
For CD-USB Synchro Recording:
Press CD, then load the disc you want
to record on the disc tray.
You can record tracks on all the discs
in the order you want using Program
Play. Perform steps 2 to 6 of "Creating
your own program" on page 20.
However, the play mode automatically
changes to Normal Play, if you start
recording in Program Play with no
tracks are programmed, Shuffle Play
or Repeat Play.
For REC1 Recording:
Press CD, then load the disc you want
to record on the disc tray. Select the
track you want to record, then press
NX.
3
Set the USB device stand by for
recording and the disc pauses
for playback.
For CD-USB Synchro Recording:
Press CD-
USB
"USB" and "SYNC" light up and
"REC" flashes in the display. The
display cycles through "CD-USB
SYNCHRO", "Push ENTER" and
"xxxxxxByte Free Space" (remaining
space on the USB device)*.
For REC1 Recording:
Press CD-
USB
"USB" lights up and "REC"
flashes in the display. The display
cycles through "CD-USB REC1",
"Push ENTER" and "xxxxxxByte Free
Space" (remaining space on the USB
device)*.
* The display will only show an integer.
For example, if the memory free space is
1.8 Gigabyte (Gb), it will only show as
1 Gb.
SYNC/REC 1.
SYNC/REC 1.