Preparations; Installing The Software - Sony DPP-MS300E User Manual

Preparations

Installing the Software

Note
The windows and dialog
boxes in this manual may
differ from what are
actually displayed.
Install the Sony Printer Utility for MS300/MS300E and
the Sony DPP-MS300/MS300E Printer Driver for
Windows 95/98 as follows.
1
Connect the PC and the printer.
For the connections, refer to "Connecting the
printer" on pages 8 through 11 of the operating
instructions for the printer.
2
Turn on your PC and the printer and start
Windows.
3
• If the following "New Hardware Found" screen
is displayed, check "Do not install a driver" and
click "OK".
• If the "Update Device Driver Wizard" screen for
Windows 95 or "Add New Hardware Wizard"
screen for Windows 98 is displayed, click "Next"
until the "Finish" button appears.
Then click "Finish."
v
continued
7 GB
Preparations