Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.
Стр. 1 из 1 LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder.
Through WEB, ver. 6.5 has been released but with it, the linking function in this manual may not work properly. If ver. 6.5 has been installed, uninstall it and reinstall ver. 6.0. To get ver. 6.0, click the icon, or contact to the nearest Toshiba Service Centre for further assistance. Freezing windows opened (Cannot close the open windows) This may happen occasionally.
Page 5
Стр. 2 из 2 Continue to use by operating the windows. Precaution when opening the diagrams While opening the diagrams, the menu in the left frame changes its color to GRAY. This is an indication that the viewer is processing. With this condition, the menu indication color may stick to the GRAY color or Windows may freeze if clicking other menu.
Page 6
Стр. 1 из 4 IMPORTANT NOTICE User Guide Autodesk® DWF™ Viewer is necessary to view drawings and to activate the functions of this system. Please download and install. When Windows XP SP2 is used, pop-up windows are limited by the enhanced security function and this sample may not work.
Стр. 2 из 4 Operating Environment : Pentium III or higher recommended Monitor : 1024 x 768 or higher resolution recommended file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 8
Стр. 3 из 4 Mouse : A mouse with wheel recommended : Microsoft Windows 2000/XP Browser Microsoft Internet Explorer 6.0 or later Drawing viewer : Autodesk DWF Viewer 6.0 * Use the software following respective license terms and conditions. Note: In case of using this service manual with network connection, allocate its folder to the client PCs as network drive to avoid any possible malfunction.
Page 9
Стр. 4 из 4 Layer Display Changing Function When any of the color buttons on the toolbar is clicked, it can be selected to display desired layer in its color or not to display each layer. This allows you to see the pattern layer only by setting other layers to "non-display".
Page 10
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.
ADJUSTMENT [LCD] USA Стр. 1 из 8 ADJUSTMENT Service Mode Entering to Service Mode 1. Set VOLUME to minimum and press MUTE button twice on Control. ↓ 2. Press MUTE button again and hold button down. ↓ Service Mode display 3.
Page 12
ADJUSTMENT [LCD] USA Стр. 2 из 8 Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. Selection of the adjustment items CH (on TV or remote control) Change of the data value Volume +/- (on TV or remote control) Adjustment menu mode ON/OFF MENU button (on remote control) Reset the count of operating...
Page 13
ADJUSTMENT [LCD] USA Стр. 3 из 8 (a) HOST-MICRO EEPROM data DRAMA0543 for LV series (b) TV-MICRO EEPROM data DRAMA0542 for LV series (2) Prior to changing any board containing an EEPROM IC, the exisiting data in each image format should be copied down as a precautionary measure. Data Item Name of adjustment...
Page 14
ADJUSTMENT [LCD] USA Стр. 4 из 8 RYBK R-Y OFF SET OPT1 TV SET OPTION 1 OPT2 TV SET OPTION 2 OPT3 TV SET OPTION 3 OPT4 TV SET OPTION 4 OPT5 TV SET OPTION 5 SET-ID MODEL ID MAGC AGC of MTS decoder Volume1 Data Volume25 Data Volume50 Data...
Page 15
ADJUSTMENT [LCD] USA Стр. 5 из 8 VVDD Reduce Volume For Dolby WFCS FOCUS Level WWSP SRS 3D Level WTBH TruBass High Level WTBL TruBass Low Level VOLM Volume coefficient at 1/2 Mute Factory preset data will be loaded after setting Model ID data. Note: (*1) SET-ID data is subject to the models.
ADJUSTMENT [LCD] USA Стр. 6 из 8 Pressing POWER button to turn off the TV once. Self Diagnostic Function 1. Press "Recall" button on Remote Control during display of adjustment menu in the service mode. This will bring up the "S" in the right corner of screen. Now press "9" button on remote.
ADJUSTMENT [LCD] USA Стр. 7 из 8 (11) DMD Engine System status : LCD Model not used. (12) TV-MICRO System status : Not used (13) IIC-BUS status Bus line normal is "None" displayed. When it is abnormal, the block name is displayed as follows. "SCL-GND"...
Page 18
ADJUSTMENT [LCD] USA Стр. 8 из 8 power cord in again and turn the TV on. 7 Green blinks quickly. Power Protection Detection. Turn the TV off and unplug the power cord, then plug the power cord in again and turn the TV on. 8 Yellew blinks 3 times.
Page 19
Стр. 1 из 2 FUNCTION AND OPERATION TV Front and Side Panel Control and Connection file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 20
Стр. 2 из 2 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Стр. 1 из 3 FUNCTION AND OPERATION Learning about the Remote Control file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 22
Стр. 2 из 3 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 23
Стр. 3 из 3 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 24
Стр. 1 из 4 FUNCTION AND OPERATION Programming Channel into the TV's Channel Memory Programming Channel Automatically file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 25
Стр. 2 из 4 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 26
Стр. 3 из 4 Manually Adding and Deleting Channel in the Channel Memory file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 27
Стр. 4 из 4 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Handling the LCD Module Стр. 1 из 4 SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 29
Handling the LCD Module Стр. 2 из 4 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
Page 30
Handling the LCD Module Стр. 3 из 4 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
Page 31
Handling the LCD Module Стр. 4 из 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 32
U03D U02A LOW-B U01A POWER U03E DVD-Key U04A SEINE U03B U03A TUNER-AV DVD Unit Front-AV U03F DVD-IF U03C LED...
SAFETY INSTRUCTION [LCD] USA Стр. 1 из 3 SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
Page 34
SAFETY INSTRUCTION [LCD] USA Стр. 2 из 3 inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7. Parts mounting and routing dressing of wirings should be the same as that used originally.
SAFETY INSTRUCTION [LCD] USA Стр. 3 из 3 limit constitutes a potential shock hazard and must be corrected immediately. Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Стр. 1 из 2 SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
Page 56
Стр. 2 из 2 All capacitors are ceramic 50 V, unless otherwise noted as the following marks. = Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4.
Page 156
Стр. 1 из 2 CABINET Stand Exploded View A425 A426 A427 A428 A429 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 157
Стр. 2 из 2 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 158
Accessory Стр. 1 из 1 Accessory Location Parts No. Description K902 75005729 REMOCON HAND UNIT, CT-90275 Y101 75007072 OWNERS MANUAL, INSERT 2 Y102 75006562 OWNERS MANUAL, E/F Y109 23945015 BAG, POLYETHYLENE COVER 250X400 Y170 23845800 HOLDER, WIRE, NYLON66 D6.8 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 159
Cabinet Стр. 1 из 1 Cabinet Location Parts No. Description A201 75007071 FRONT BEZEL ASSY A320 75005734 PIECE, CTRL S ASSY A380 23717240 SCREW, BITTB3X10SZN A401 75005793 BACK COVER ASSY A411 23717267 SCREW, BITTB4X16 SBN A412 23717214 SCREW, BITTB3X12SBN A420 75006546 STAND KIT, FIX BB A425...
Page 160
Miscellaneous Стр. 1 из 1 Miscellaneous Location Parts No. Description B001 75006932 LCD PANEL, G6SEC32L06, LTA320WT-L06 BD01 75005731 CD/DVD-R/RW COMBO, DVC-303S-TO MD05 75005732 CABLE, 20624 ASFBNCD-TN2-P=0.5-K1-45-172 Z 4/15BL UL MZ01 75005836 WIRE HARNESS, LVDS, V90A00011900 P801 75002678 POWER CORD, INQ2682(1) PP08 23974994 BAND, KESSOKU...
Page 161
Packing Стр. 1 из 1 Packing Location Parts No. Description A701 75008046 CARTON CASE, CASE A702A 75006548 PAD, TOP PACKING A702B 75006549 PAD, BOTTOM PACKING A703 23945143 BAG, PROTECTIVE A706 75006551 CARTON, O/M CASE file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Стр. 1 из 2 PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
Page 163
Стр. 2 из 2 : Electrolytic : Metal Film : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17... 30.04.2015...
Page 164
U01A POWER (PE0246) Стр. 1 из 5 U01A POWER (PE0246) Parts Location Description U01A 75005783 PC BOARD ASSY, PE0246A1, POWER C801 76503510 CAPACITOR, PLASTIC FILM, LE224-C C802 76503510 CAPACITOR, PLASTIC FILM, LE224-C C803 76168103 CAPACITOR, PLASTIC FILM, 400V 0.22UF J C804 76214103 CAPACITOR, CERAMIC DISC, 500V B 0.01UF K C805...
Page 165
U01A POWER (PE0246) Стр. 2 из 5 CE18 76503253 CAPACITOR, PLASTIC FILM, 1250VH 0.01UF H CE23 76109471 CAPACITOR, CERAMIC CHIP, 50V B 470PF K CE24 76285104 CAPACITOR, CERAMIC CHIP, 50V B 0.1UF K CE43 76092883 CAPACITOR, CERAMIC CHIP, 50V B 0.1UF K CE82 76676470 CAPACITOR, ELECTROLYTIC, 100V 47UF M CE83...
Page 190
U03B F-AV (PE0248) Стр. 1 из 1 U03B F-AV (PE0248) Location Parts No. Description U03B 75005777 PC BOARD ASSY, PE0248A2, F-AV CC11 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K CC12 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K GR605 76000445 CHIP JUMPER, 1608TYPE PV25B...
Page 191
U03C LED (PE0248) Стр. 1 из 1 U03C LED (PE0248) Location Parts No. Description U03C 75005778 PC BOARD ASSY, PE0248A3, LED CB02 76619102 CAPACITOR, ELECTROLYTIC CHIP, 16V 47UF M CB03 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z CB04 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z CB05 76619157...
Page 208
U04AS SEINE (PE0361) Стр. 12 из 23 C990 V03GD0001138 CHIP CERAMIC CAPACITOR (1608) C991 V03GD0001318 CHIP CERAMIC CAPACITOR (2012) CN30 V22GD0001431 2MM PITCH W TO B CONNECTOR CN60 V22GD0001692 0.5MM PITCH W TO B CONNECTOR CN61 V22GD0001451 2MM PITCH W TO B CONNECTOR CN70 V22GD0000232 1.25MM PITCH BRIDGE CONNECTOR CN71...
Page 209
U04AS SEINE (PE0361) Стр. 13 из 23 IC101 V47A00001100 IC IC104 V47A00001300 IC IC105 V47A00002600 IC IC106 75005768 IC107 V45GD0000365 SINGLE NON-INVERTING BUFFER IC108 75005770 IC109 V46GD0001233 128K(16KX8)BIT EEPROM IC110 75005769 IC111 75005769 IC114 V45GD0000360 D-TYPE FLIP FLOP IC115 75005766 IC 8MBIT(512KX16) NOR FLASH RO IC117 75002348...