Canon 700 Series Facsimile Manual page 161

4
1 2 3
4 5 6
7 8 9
0
Set
5
1 2 3
4 5 6
7 8 9
0
Set
6
6
Set
7
Stop
6-8 Setting Up and Using a Standard Relay Unit
Enter the two digit relay group number that you want to
change using the numeric keys ➞ press [Set].
You can also press [▼] or [▲] to select a relay group number.
The prompt <PASSWORD> will be displayed if you have previously set a
password. Proceed to step 5. Otherwise, proceed to step 6.
Enter the password (up to seven digits) using the numeric
keys ➞ press [Set].
If you have not previously set a password, proceed to step 6.
Press [▼] or [▲] to display the setting you want to change ➞
press [Set].
To change the settings for an item, follow the same procedure you used for the
initial setup of the relay group. (See "Setting Your Machine as a Relay Unit," on p.
6-3.)
NOTE
• To delete an item, press
• To turn 'OFF' the relay feature for the group and retain the group setup, press [▼] or
[▲] to display <10.RELAY B'CAST> ➞ press
You do not have to delete the relay group to disable it temporarily.
• To change the password for your relay group, you have to first enter the old
password (it is not displayed as you enter it) ➞ press
password (it is displayed as you enter it) ➞ press
When you are finished making changes, press [Stop] to return
to the Standby mode.
➞
➞
(Clear) ➞
(Set).
C
Set
(Set), and turn this feature 'OFF'.
Set
Set
(Set) ➞ enter a new
Set
(Set).