JVC MX-GA9V Service Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Stereo System
  5. MX-GA9V
  6. Service manual
JVC MX-GA9V Service Manual

JVC MX-GA9V Service Manual

Compact component system
Hide thumbs Also See for MX-GA9V:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
COMPACT COMPONENT SYSTEM
9
2003
MB011
1
PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2
SPECIFIC SERVICE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
3
DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
4
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-36
5
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-40
All manuals and user guides at all-guides.com
MX-GA9V

TABLE OF CONTENTS

COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LIMITED
COMPACT
COMPACT
DIGITAL VIDEO
DIGITAL AUDIO
Area Suffix
UX ---------- Saudi Arabia
UN ------------------ Asean
U ------------- Other Areas
No.MB011
2003/10

Advertisement

Table of Contents
loading

Related Manuals for JVC MX-GA9V

Summary of Contents for JVC MX-GA9V

  • Page 1: Table Of Contents

    All manuals and user guides at all-guides.com SERVICE MANUAL COMPACT COMPONENT SYSTEM MB011 2003 MX-GA9V COMPACT COMPACT DIGITAL VIDEO DIGITAL AUDIO Area Suffix UX ---------- Saudi Arabia UN ------------------ Asean U ------------- Other Areas TABLE OF CONTENTS PRECAUTION............... . . 1-3 SPECIFIC SERVICE INSTRUCTIONS .
  • Page 2 All manuals and user guides at all-guides.com SPECIFICATION Amplifier section 88 W per channel, min. RMS, both channels driven into 6 Ω at 63 Output Power SUB WOOFERS Hz with no more than 0.9% total harmonic distortion. 28 W per channel, min. RMS, both channels driven into 6 Ω at 1 MAIN SPEAKERS kHz with no more than 0.9% total harmonic distortion.

  • Page 3: Precaution

    All manuals and user guides at all-guides.com SECTION 1 PRECAUTION Safety Precautions (1) This design of this product contains special hardware and voltmeter. many circuits and components specially for safety purpos- Move the resistor connection to each exposed metal es. For continued protection, no changes should be made part, particularly any exposed metal part having a return to the original design unless authorized in writing by the path to the chassis, and measure the AC voltage across...
  • Page 4 All manuals and user guides at all-guides.com Preventing static electricity Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs. 1.5.1 Grounding to prevent damage by static electricity Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as CD players.
  • Page 5 All manuals and user guides at all-guides.com Important for laser products 5.CAUTION : If safety switches malfunction, the laser is able 1.CLASS 1 LASER PRODUCT to function. 2.DANGER : Invisible laser radiation when open and inter 6.CAUTION : Use of controls, adjustments or performance of lock failed or defeated.

  • Page 6: Specific Service Instructions

    All manuals and user guides at all-guides.com SECTION 2 SPECIFIC SERVICE INSTRUCTIONS This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS. 1-6 (No.MB011)

  • Page 7: Disassembly

    All manuals and user guides at all-guides.com SECTION 3 DISASSEMBLY Main body 3.1.1 Removing the metal cover (See Fig.1 ~ 3) (1) Remove the six screws A on the back of the body. Metal cover (2) Remove the two screws B on both sides of the body. (3) Remove the metal cover from the body by lifting the rear part of the cover.
  • Page 8 All manuals and user guides at all-guides.com 3.1.2 Removing the CD changer mechanism assembly Front panel assembly (See Fig.4 ~ 6) • Prior to performing the following procedure, remove the metal cover. (1) Disconnect the wire from connector CN705 on the amplifier board.
  • Page 9 All manuals and user guides at all-guides.com 3.1.4 Removing the front panel assembly (See Fig.8 ~ 11) • Prior to performing the following procedure, remove the metal cover and CD changer mechanism assembly. (1) Disconnect the card wires from connector CN870, CN871 CN315 on the main board respectively.
  • Page 10 All manuals and user guides at all-guides.com 3.1.6 Removing the rear cover / rear panel Rear panel (See Fig.13 ~ 16) • Prior to performing the following procedure, remove the metal cover and the CD changer mechanism assembly. (1) Remove the screw H attaching the rear cover on the back of the body.
  • Page 11 All manuals and user guides at all-guides.com 3.1.7 Removing the main board Main board (See Fig.17 ~ 19) CN870 Front panel assembly • Prior to performing the following procedure, remove the metal CN871 cover, the CD changer mechanism assembly, the rear panel CN315 and the antenna board.
  • Page 12 All manuals and user guides at all-guides.com 3.1.9 Removing the power board CN218 (See Fig.20) Power board • Prior to performing the following procedure, remove the metal CN219 cover, the CD changer mechanism assembly and the rear pan- (1) Remove a wire clamp on the power board. (2) Disconnect the wire from connector CN218, CN219 CN250...
  • Page 13 All manuals and user guides at all-guides.com 3.1.11 Removing the power transformer assembly Regulator board (See Fig.23, 24) CN204 Power board • Prior to performing the following procedure, remove the metal cover, the CD changer mechanism assembly and the rear pan- CN219 (1) Disconnect the wires from connector CN218...
  • Page 14 All manuals and user guides at all-guides.com 3.1.12 Removing the regulator board Stopper (See Fig.25) • Prior to performing the following procedure, remove metal cov- er, CD changer mechanism assembly, rear panel, antenna board, main board, amplifier board, voltage board, power board and speaker board.
  • Page 15 All manuals and user guides at all-guides.com Front panel assembly • Prior to performing the following procedure, remove the metal cover, the CD changer mechanism assembly and the front panel assembly. 3.2.1 Removing the cassette mechanism assembly (See Fig.27) (1) Disconnect the card wire from connector CN306 on the Head amplifier...
  • Page 16 All manuals and user guides at all-guides.com 3.2.2 Removing the display system control board (See Fig.28 ~ 30) (1) Remove the four screws O attaching the stay bracket. (2) Disconnect the card wires from connector CN316 CN880 on the display system control board. (3) Remove the seven screws P attaching the display system control board.
  • Page 17 All manuals and user guides at all-guides.com 3.2.4 Removing the preset / tuning switch board Preset / tuning switch board (See Fig.32, 33) • Prior to performing the following procedure, remove the dis- play system control board. (1) Pull out the preset knob on the front panel. (2) Remove the four screws R attaching the preset / tuning switch board.
  • Page 18 All manuals and user guides at all-guides.com CD Changer Mechanism • Remove the CD changer mechanism assembly. 3.3.1 Removing the CD Servo control board (See Fig.1) (1) From bottom side the CD changer mechanism assem- bly,remove the four screws A retaining the CD servo con- trol board.
  • Page 19 All manuals and user guides at all-guides.com 3.3.2 Removing the CD tray assembly T.Braket (See Fig.2~9) (1) Remove the CD servo control board. (2) Remove the screw B retaining the lod stopper. (3) From the T.bracket section b and clamper base section c , remove both of the edges fixing the rod.
  • Page 20 All manuals and user guides at all-guides.com Chassis assembly CD tray assembly Pawl Refer to Fig.7 Pulley gear Fig.6 Motor pulley Fig.8 CD tray assembly Drive unit of elevator Fig.7 Pawl Fig.9 3.3.3 Removing the CD loading mechanism assembly (See Fig.10) (1) While turning the cams R1 and R2 assembly in the arrow Cams R1, R2 assembly direction h ,align the shaft i of the CD loading mechanism...
  • Page 21 All manuals and user guides at all-guides.com 3.3.4 Removing the CD traverse mechanism Cam R1, R2 assembly (See Fig.11 and 12) (1) For dismounting only the CD traverse mechanism without removing the CD loading mechanism assembly, align the shaft j of the CD loading mechanism assembly to the po- sition shown Fig.11 while turning the cam R1 and R2 as- Arrow sembly in the arrow direction k .
  • Page 22 All manuals and user guides at all-guides.com 3.3.6 Removing the try select switch board Chassis assembly (See Fig.14) (1) Remove the two screws G retaining the tray select switch board. Tray select (2) Disconnect the tray select switch board from connector switch board CN854 on the CD servo control board.
  • Page 23 All manuals and user guides at all-guides.com 3.3.8 Removing the actuator motor and belt Chassis assembly (See Fig.18~21) (1) Remove the two screws I retaining the gear bracket. (2) While pressing the pawl t fixing the gear bracket in the ar- row direction, remove the gear bracket.
  • Page 24 All manuals and user guides at all-guides.com 3.3.9 Removing the cams R1/R2 assembly and cam gear q Slit washer (See Fig.22) (1) Remove the slit washer fixing the cams R1 and R2 assem- Cam R2 Slit washer bly. (2) By removing the two pawls w fixing the cam R1, separate Cam gear q R2 from R1.
  • Page 25 All manuals and user guides at all-guides.com 3.3.11 Removing the Pickup unit Pickup unit Chassis base (See Fig.24 and 25) (1) Turn the cam gear in the direction of the arrow to move the Joint a pickup unit toward the center. (2) Extend the guide shaft stopper in the direction of the arrow, Pickup unit move the guide shaft and pull out as shown in the figure.
  • Page 26 All manuals and user guides at all-guides.com 3.3.12 Removing the CD mechanism board (See Fig.26) (1) On the back of the CD mechanism assembly, unsolder the Soldering c four soldering c attaching the CD mechanism board, the spindle motor and the feed motor. (2) Removing the screw A.
  • Page 27 All manuals and user guides at all-guides.com Cassette mechanism assembly 3.4.1 Removing the R/P & E head (See Fig. 1 to Fig. 3) (1) While shifting the trigger arms seen on the right side of the Cassette mechanism head mount in the arrow direction, turn the flywheel ( R ) in counterclockwise direction until the head mount has gone out with a click (See Fig.
  • Page 28 All manuals and user guides at all-guides.com 3.4.2 Reassembling the playback / recording & eraser head (See Fig. 4 to Fig. 6) (1) Keep the direction lever of head mount assembly to left side (head direction is forward direction). (2) Fix the head mount assembly boss O', P', Q', U' and V' to mechanism sub assembly hole P, V and ditch O, U and Q (See Fig.
  • Page 29 All manuals and user guides at all-guides.com 3.4.3 Removing the head amplifier & mechanism control board (See Fig. 7) (1) Remove the cassette mechanism assembly Head amp. & mechanism (2) After turning over the cassette mechanism assembly, control board remove the three screws 1 retaining the head amplifier & mechanism control board.
  • Page 30 All manuals and user guides at all-guides.com 3.4.5 Removing the capstan motor (See Fig. 11) (1) Remove the two screws 3 from the capstan motor, and Capstan motor then remove the joint bracket. Joint bracket Fig.11 3.4.6 Removing the flywheel (See Fig.
  • Page 31 All manuals and user guides at all-guides.com 3.4.8 Reassembling the control cam (See Fig. 15 to Fig. 17) (1) Shift to left side (forward direction) the head mount assembly, hole K’ of control cam into the hollow K of the mechanism sub assembly.
  • Page 32 All manuals and user guides at all-guides.com Speaker section 3.5.1 Removing the front cover Joint a Joint a (See Fig.1, 2) CAUTION: Do not break or damage the front panel and body that are glued at the joints a. (See Fig.1) (1) Remove the four screws A on the front of the body respec- tively.
  • Page 33 All manuals and user guides at all-guides.com 3.5.2 Removing the woofer speaker (See Fig.3) • Prior to performing the following procedure, remove the front cover. (1) Remove the four screws B on the front of the body. (2) Pull out the woofer speaker toward the front and discon- nect the wire (yellow and black, red and black) from the two speaker terminals.
  • Page 34 All manuals and user guides at all-guides.com Woofer speaker section Joint b Joint b 3.6.1 Removing the front cover (See Fig.5) CAUTION: Do not break or damage the front panel and body that are glued at the joints b. (See Fig.5) (1) Remove the four screws D on the front of the body respec- tively.
  • Page 35 All manuals and user guides at all-guides.com Removing the Rear speaker 3.7.1 Removing the Rear cover Rear cover (See Fig.7 ~ 9 ) (1) Remove the four screws F on the back of the body. (2) Disconnect the wires from the two terminals on the rear speaker.

  • Page 36: Adjustment

    All manuals and user guides at all-guides.com SECTION 4 ADJUSTMENT Measurement instruments required for adjustment 4.2.1 Radio input signal AM modulation frequency : 400Hz (1) Low frequency oscillator, Modulation factor : 30% This oscillator should have a capacity to output 0dBs to FM modulation frequency : 400Hz 600Ω...
  • Page 37 All manuals and user guides at all-guides.com Arrangement of adjusting positions Cassette mechanism section (Back side) Cassette mechanism section (Mechanism A section) Head azimuth Head azimuth adjusting screw adjusting screw (Reverse side) (Forward side) Head azimuth Head azimuth adjusting screw Playback, recording and eraser adjusting screw Playback...
  • Page 38 All manuals and user guides at all-guides.com Tape recorder section Items Measurement conditions Measurement method Standard values Adjusting positions Confirmation Test tape 1.Playback the test tape VT710 (10kHz). Maximum output Adjust the head of head angle : VT710 (10kHz) 2.With the playback mechanism or azimuth screw only Measurement output terminal recording &...
  • Page 39 All manuals and user guides at all-guides.com Electrical performance Items Measurement conditions Measurement method Standard values Adjusting positions Adjustment of *Mode : Forward or reverse mode 1.With the recording and playback AC-225 : 4.20µA LcH : VR101 recording *Recording mode mechanism, load the test tapes(AC-225 RcH : VR201 bias current...

  • Page 40: Troubleshooting

    All manuals and user guides at all-guides.com SECTION 5 TROUBLESHOOTING This service manual does not describe TROUBLESHOOTING. 1-40 (No.MB011)
  • Page 41 All manuals and user guides at all-guides.com (No.MB011)1-41...
  • Page 42 All manuals and user guides at all-guides.com VICTOR COMPANY OF JAPAN, LIMITED AV & MULTIMEDIA COMPANY AUDIO/VIDEO SYSTEMS CATEGORY 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan (No.MB011) Printed in Japan...
  • Page 43 All manuals and user guides at all-guides.com PARTS LIST [ MX-GA9V ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix UX ------------------- Saudi Arabia UN ----------------------------Asean U ---------------------- Other Areas - Contents - 3- 2 Exploded view of general assembly and parts list (Block No.M1)
  • Page 44 All manuals and user guides at all-guides.com Exploded view of general assembly and parts list Block No. Display system control board Operation switch board 10 10 CD servo control board Preset / tuning switch board CD eject board 35 33 38 2...
  • Page 45 All manuals and user guides at all-guides.com 49 51 74 73 Tuner board VCD board Main board oard Voltage board Amplifier board Speaker terminal board Regulator board Transformer board...
  • Page 46 GV10057-010A FRONT PANEL QYSBSGY3008E SPECIAL SCREW 3mm x 8mm(x2) E75896-001 FELT SPACER (x2) QYSBSGY3008E SPECIAL SCREW 3mm x 8mm(x2) GV40077-002A JVC BADGE QYSBSGY3008E SPECIAL SCREW 3mm x 8mm(x2) GV40136-001A STBY.INDICATOR QYSBSGY3008E SPECIAL SCREW 3mm x 8mm GV30154-005A CD BUTTON QYSBSF3012E...

  • Page 47: Speaker Assembly And Parts List (Main) (Block No.m2)

    All manuals and user guides at all-guides.com Speaker assembly and parts list Block No. (Main) Main speaker Block No. [M][2][M][M]  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local 135604161053 SCREW M4X16 (x8) 137640601416 BACK LABEL(L)

  • Page 48: Speaker Assembly And Parts List (Surround) (Block No.m6)

    All manuals and user guides at all-guides.com Speaker assembly and parts list Block No. (Surround) Surround speaker Block No. [M][6][M][M]  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local 600-00XSZ9-00 SPEC LABEL (x2) J227HXZ9V00G40 FRONT CASE ASSY (x2)

  • Page 49: Speaker Assembly And Parts List (Subwoofer) (Block No.m7)

    All manuals and user guides at all-guides.com Speaker assembly and parts list Block No. (Subwoofer) Subwoofer Block No. [M][7][M][M]  Symbol No. Part No. Part Name Description Local 991062000069 SUB WOOFER ASSY (x2) 199733350194 F.PANEL ASSY(L) 199733350195 F.PANEL ASSY(R) 135604161053 SCREW M4X16 (x8) 135604161047...

  • Page 50: Cd Changer Mechanism Assembly And Parts List (Block No.ma)

    All manuals and user guides at all-guides.com CD changer mechanism assembly and parts list Block No. C3BASE-2M Grease = EM-30L = EBS0006-009B = FL-7750E FIG B FIG C FIG C FIG B Opposite side the same. FIG A FIG A CAUTION The axes of each gear to apply grease:Half face...
  • Page 51 All manuals and user guides at all-guides.com CD changer mechanism Block No. [M][A][M][M]  Symbol No. Part No. Part Name Description Local VKS1144-004 CHASSIS VKS3698-003 TRAY GUIDE (x2) VKS5532-003 PULLEY GEAR (x2) VKB3000-164 BELT (x2) VKS5505-003 GEAR B (x2) VKS5506-002 GEAR C (x3) VKS5507-002...

  • Page 52: Cd Mechanism Assembly And Parts List (Block No.mb)

    All manuals and user guides at all-guides.com CD mechanism assembly and parts list Block No. Grease & Bond = JVG-31N FXL-M73T-1M CD mechanism Block No. [M][B][M][M]  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local QSW0506-001...

  • Page 53: Cassette Mechanism Assembly And Parts List (Block No.mp)

    All manuals and user guides at all-guides.com Cassette mechanism assembly and parts list Block No. SLC-W101M Cassette switch board Head amplifier & mechanism control board 3-11...
  • Page 54 All manuals and user guides at all-guides.com Cassette mechanism Block No. [M][P][M][M]  Symbol No. Part No. Part Name Description Local VKS1165-00P CHASSIS B.ASSY (x2) VKR4749-004 IDLE PULLEY (x2) LV43259-001A SHAFT (x2) WDL173525-2 SLIT WASHER (x2) VKS2274-002 REEL GEAR (x4) VKW5286-002 B.T.
  • Page 55 All manuals and user guides at all-guides.com Grease point =JC-525 Grease =UD-24 =LEN-320M =MOBIL-1 B mecha A mecha 3-13...
  • Page 56 All manuals and user guides at all-guides.com Front view Rear view B - B (2/1) C - C (2/1) D - D (2/1) E - E (5/1) A - A (2/1, 2 places) (Dipping) 3-14...

  • Page 57: Electrical Parts List (Block No.01~08)

    KTA1268/GL/-T TRANSISTOR C610 QCSB1HJ-100Y C CAPACITOR 10pF 50V J Q728 2SC2785/FE/-T TRANSISTOR C611 QETN1HM-476Z E CAPACITOR 47uF 50V M Q733 2SC3576-JVC-T TRANSISTOR C612 QETN1HM-476Z E CAPACITOR 47uF 50V M Q734 2SC3576-JVC-T TRANSISTOR C613 QFLC1HJ-473Z M CAPACITOR 0.047uF 50V J Q735...
  • Page 58 C RESISTOR 100kΩ 1/4W J H.phone amp. R730 QRE141J-103Y C RESISTOR 10kΩ 1/4W J R733 QRE141J-472Y C RESISTOR 4.7kΩ 1/4W J Q401 2SC3576-JVC-T TRANSISTOR R734 QRE141J-472Y C RESISTOR 4.7kΩ 1/4W J Q402 2SC3576-JVC-T TRANSISTOR R735 QRE141J-472Y C RESISTOR 4.7kΩ 1/4W J...
  • Page 59 All manuals and user guides at all-guides.com  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local C510 QETN1HM-475Z E CAPACITOR 4.7uF 50V M D411 1SS119-041-T2 DIODE C514 QFLC1HJ-823Z M CAPACITOR 0.082uF 50V J D412 1SS119-041-T2 DIODE...
  • Page 60 All manuals and user guides at all-guides.com  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local R492 QRE141J-472Y C RESISTOR 4.7kΩ 1/4W J CN218 QGA7901F1-03 CONNECTOR W-B (1-3) R493 QRE141J-103Y C RESISTOR 10kΩ...
  • Page 61 DIGI TRANSISTOR C962 QDYB1CM-103Y C CAPACITOR 0.01uF 16V M Q1023 KRA111M-T DIGI TRANSISTOR C963 QDYB1CM-103Y C CAPACITOR 0.01uF 16V M Q1061 2SC3576-JVC-T TRANSISTOR C1004 QDGB1HK-102Y C CAPACITOR 1000pF 50V K C1005 QDGB1HK-102Y C CAPACITOR 1000pF 50V K D308 DZ5.6BSC-T2 Z DIODE...
  • Page 62 All manuals and user guides at all-guides.com  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local R835 QRE141J-104Y C RESISTOR 100kΩ 1/4W J R940 QRE141J-680Y C RESISTOR 68Ω 1/4W J R836 QRE141J-104Y C RESISTOR 100kΩ...
  • Page 63 All manuals and user guides at all-guides.com  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local CN860 QGF1205F1-17 CONNECTOR FFC/FPC (1-17) C605 NCS31HJ-331X C CAPACITOR 330pF 50V J CN861 QGF1205F1-17 CONNECTOR FFC/FPC (1-17) C606 NCS31HJ-151X...
  • Page 64 All manuals and user guides at all-guides.com  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local R611 NRSA63J-512X MG RESISTOR 5.1kΩ 1/16W J R884 NRSA63J-102X MG RESISTOR 1kΩ 1/16W J R613 NRSA63J-332X MG RESISTOR 3.3kΩ...
  • Page 65 All manuals and user guides at all-guides.com  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local C137 NCB31CK-103X C CAPACITOR 0.01uF 16V K NCB21HK-102X C CAPACITOR 1000pF 50V K C138 QERF1AM-107Z E CAPACITOR 100uF 10V M NRSA02J-0R0X...
  • Page 66 PHOTO SENSER C3602 QCBB1HK-271Y C CAPACITOR 270pF 50V K IC332 SG-105F3-BB,C PHOTO SENSER R3103 QRE141J-183Y C RESISTOR 18kΩ 1/4W J Q3105 2SC3576-JVC-T TRANSISTOR R3105 QRE141J-220Y C RESISTOR 22Ω 1/4W J Q3205 2SC3576-JVC-T TRANSISTOR R3106 QRE141J-392Y C RESISTOR 3.9kΩ 1/4W J...
  • Page 67 All manuals and user guides at all-guides.com  Symbol No. Part No. Part Name Description Local R3218 QRE141J-152Y C RESISTOR 1.5kΩ 1/4W J R3219 QRE141J-203Y C RESISTOR 20kΩ 1/4W J R3220 QRE141J-102Y C RESISTOR 1kΩ 1/4W J R3221 QRE141J-122Y C RESISTOR 1.2kΩ...

  • Page 68: Packing Materials And Accessories Parts List (Block No.m3)

    All manuals and user guides at all-guides.com Packing materials and accessories parts list Block No. A5,A6,A7, 3-26...

  • Page 69: [ Mx-Ga9V ]

    All manuals and user guides at all-guides.com Packing and accessories Block No. [M][3][M][M]  Symbol No. Part No. Part Name Description Local GVT0079-001F INST BOOK ENG,CHI,ARA GV40215-003A NOTICE SHEET GV40350-003A CAUTION SHT QAL0014-001 AM LOOP ANT QAL0457-001 ANT.WIRE MXGA 9VU, ...

  • Page 70: Area Suffix

    All manuals and user guides at all-guides.com SCHEMATIC DIAGRAMS COMPACT COMPONENT SYSTEM MX-GA9V CD-ROM No.SML200310 Area Suffix UX ---------- Saudi Arabia UN ------------------ Asean U ------------- Other Areas COMPACT COMPACT DIGITAL AUDIO DIGITAL VIDEO Contents Block diagram --------------------------------------------- Standard schematic diagrams ------------------------...
  • Page 71 All manuals and user guides at all-guides.com In regard with component parts appearing on the silk-screen printed side (parts side) of the PWB diagrams, the parts that are printed over with black such as the resistor ( diode ( ) and ICP ( ) or identified by the "...
  • Page 72 All manuals and user guides at all-guides.com Block diagram R.SEARCH VOL+/- AUDATA F.SEARCH DA0 to DA8 AM RF,AM OSC SMVOL+/- BCLK IC107 TBCK MAIN VOL. SEARCHLED SEARCH DBUS0 to DBUS15 AFC,REG BASSVOL+/- BUFF MW RF SOUND VOL. KNOB /DWE, /DRAS IC104 &...
  • Page 73 All manuals and user guides at all-guides.com Standard schematic diagrams Power supply section 0.33( 1/2W) R1002 T001 CN220 QGD2504C1-03Z CN214 QJK015-071214 F102 T4AL F101 T4AL F003 T2AL F001 CN250 T4AL CN218 QGA3901C1-03 CN208 QGA7901C1-02 WJK0114-001A Parts are safety assurance parts. When replacing those parts make sure to use the specified one.
  • Page 74 R798 220P R740 220P 220P D703 D704 Q713 Q737 KTC1027/OY/-T D622 KRA111M-T R736 Q612 Q736 4.7K DZ9.1BSB-T2 C722 R776 2SA1175/FE/-T 2SC3576-JVC-T R797 R668 R734 Q734 R602 4.7K C622 R676 2SC3576-JVC-T Q790 R733 2SC2785/FE/-T 10/35V Q733 R792 4.7K 2SC3576-JVC-T C721 R775...
  • Page 75 2SC2785/FE/-T C416 0.015 R575 Q586 2SC2785/FE/-T R411 AUXL C419 0.0022 100p C575 R412 AUXR C980 0.022 R415 R417 2.2k Q573 2SC3576-JVC-T Q413 RECL 2SC2785/FE/-T L572 KRA102M-T R419 J411 QQR0779-001Z L571 QNN0420-001 Q411 QQR0779-001Z R420 L568 AUXMUTE QQR0779-001Z R416 R418 2.2k...
  • Page 76 All manuals and user guides at all-guides.com FL display / System control LSI section S999 FL801 R970 S996 IC951 QLF0081-001 GPIU271X CD1LED S995 CD2LED CD3LED C836 10/25 S997 L-192ZSRD-T R961 D962 L806 C817 22/50 QQR0779-001Z S998 QQL244K-100Z L805 R998 C815 L815 QQL244K-100Z 22/50...
  • Page 77 All manuals and user guides at all-guides.com User control key / Mic amp. section IC901 NJM4580L C1068 0.22/50 S915 D1061 R1063 R1068 S916 R1062 C1066 Q919 Q920 Q918 330P R1069 S917 Q1061 2SD2144S/VW/-T 1000p C1021 J1021 QNS0184-001 MTZJ2.4B-T2 D1062 R1021 4.7k JS901 QSW0911-001...
  • Page 78 All manuals and user guides at all-guides.com CD servo control / CD changer mechanism control section CN805 R887 CAM0 R888 R886 CAM1 R871 R889 R872 R885 CAM2 R890 R873 R884 CAM3 IC851 IC852 R891 LB1641 LB1641 R876 R892 R883 CAM4 R875 R893 R882...
  • Page 79 IC331 IC332 SG-105F3-BB,C SG-105F3-BB,C D311 D302 C3204 1SR139-400-T2 1SR139-400-T2 R3205 R3208 Q3205 220P R3220 R3370 C3219 0.056 C3205 R3359 R3362 2SC3576-JVC-T R3368 100/10 C3303 22/16 IC301 BA3126N R3219 R3207 2.2K CN333 QGB2011L1-10 C3206 R3206 MSI-5U2LWA 3.9K C3203 C3201 0.033 CN301...
  • Page 80 All manuals and user guides at all-guides.com Tuner section 0.0039 0.47/50 0.0022 470P 0.047 22/16 0.27 1/50 0.047 22/16 0.001 10/16 10/16 100/10 1000P R8( D2) *C43 *C42 3.3K VCF2L3B-105Z LC72136N 1SS133-T2 LA1838 1SS133-T2 QNB0014-001 VCF2L3B-105Z 5.6K DTA114YKA-X 150P QQR0793-001 150P 150P 1/50...
  • Page 81 All manuals and user guides at all-guides.com Video out section LA17 IC102 LA16 LA15 LA12 R118 D102 R119 L101 3.3U DGND C113 Q101 D101 X101 C111 C112 C115 R120 QAX0700-001Z 470p 470p C114 L102 R121 3.3u 100k 1000p K101 C131 C130 0.1/16 100/10...
  • Page 82 All manuals and user guides at all-guides.com Regulator board Printed circuit boards Search board FW901 Q901 Amp. board R908 C739 C716 R727 2-11...
  • Page 83 All manuals and user guides at all-guides.com R420 C594 R436 R407 FT521 FT522 R405 CN209 FT511 FT512 CN219 CN250 CN208 Power supply board Trans board...
  • Page 84 All manuals and user guides at all-guides.com Display system control board R873 R874 R871 R872 R840 R827 Q811 R869 R870 R848 Q810 R205 R867 Q858 R843 R868 Q809 D815 L815 IC830 R866 R858 C840 C815 R859 R826 R884 D832 R961 Voltage board R857 R895...
  • Page 85 All manuals and user guides at all-guides.com CD servo control board (forward side) CD servo control board (reverse side) L853 B6053 [L853] C860 M851 C853 R855 M851 B6010 IC851 IC851 M852 B6505 B6011 D851 C854 D851 B6009 C254 IC852 IC852 M852 C855 C852...
  • Page 86 All manuals and user guides at all-guides.com Cassette control board C3205 C3206 R3205 C3204 R3206 C3207 R3207 R3105 R3208 R3209 R3212 C3215 C3216 R3214 C3222 C3208 R3106 C3212 C3107 R3107 C3213 R3221 C3304 C3303 R3121 C3112 C3340 C3306 C3602 C3115 C3305 R3112 C3116...
  • Page 87 All manuals and user guides at all-guides.com VCD board (forward side) CN102 IC105 C112 CN101 L101 R105 C111 K101 C115 C113 C131 C104 D101 IC101 X101 C117 R101 C105 C103 C114 R128 D102 R121 R132 R130 R135 C118 R136 C129 C121 IC104 C133...
  • Page 88 All manuals and user guides at all-guides.com < M E M O >...
  • Page 89 All manuals and user guides at all-guides.com VICTOR COMPANY OF JAPAN, LIMITED AV & MULTIMEDIA COMPANY AUDIO/VIDEO SYSTEMS CATEGORY 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan Printed in Japan (No.MB011SCH)

Table of Contents