2.3
List of Jumpers
Please refer to the table below for all of the board's jumpers that you can configure for
your application
Label
JP1
JP2
2.3.1
Auto Power Button Enable/Disable Selection (JP1)
1 2 3
Enable/AT (Default)
Note: When disabled, the power button of CN3 (1-2) is used to power on the system
2.3.2
Clear CMOS Jumper (JP2)
1 2 3
Clear CMOS
Chapter 2 – Hardware Information
Function
Auto Power Button Enable/Disable Selection
Clear CMOS Jumper
Disable/ATX
Normal (Default)
11