Page 1
Mobile Lead Porta-Shield, LB-MB2424, LB-MB2436, LB-MB2448 Tools needed ● 7/16” and ¾”Socket or Adjustable Wrench ● ⅛” , 5/32 ”Allen Wrench ● Flathead or Phillips Screwdriver Instructions Step Description Image Unscrew all the bolts and setscrews. A. If shield and the arm are attached do not unassemble.
Page 2
Mobile Lead Porta-Shield, LB-MB2424, LB-MB2436, LB-MB2448 4)b) One the inner rod is within the cavity of the outer rod, slide push pin into the opening of the inner rod. Move the inner down until the push pin is resting on the out rod.
Page 3
Mobile Lead Porta-Shield, LB-MB2424, LB-MB2436, LB-MB2448 Place Lead Shield on Arm. This will require the removal of the six bolts. A. Place the shield on a level surface with the Arm on top of the shield. B. Then, place the bolt through the holes.