1. PURPOSE
If LD (Laser Diode) have problem, disc reading problem can happen. So it is needed to check LD status.
2. LD CHECK PROCEDURE
1) Power on the set.
2) Press Settings.
3) Under DISPLAY highlighted condition, press '5'
'1' '7' '7' '7' '7' '7' Enter on the
remote controller to display special mode.
Move to the [1]Laser Check and click.
LD CHECK GUIDE
4) Check result is shown automatically. If you will
5-2
see "PASS", BD/DVD/CD LD status is OK.
Copyright © 2020 LG Electronics Inc. All rights reserved.
Only for training and service purposes.