Advertisement
Quick Links
Manfrotto 502 Tripod quick guide
The Manfrotto 502 tripod is the main tripod used by 1
st
years.
The Sony NX100, Canon DSLR cameras, and Bolex cameras can all
use the 502 easily. The 502 is also available for C100 cameras if a
lighter tripod is necessary.
This tutorial will go over the basics of what each part of the tripod is
and does and how to pack it properly in order to not damage it.
Advertisement
Related Manuals for Manfrotto 502
Summary of Contents for Manfrotto 502
- Page 1 The Sony NX100, Canon DSLR cameras, and Bolex cameras can all use the 502 easily. The 502 is also available for C100 cameras if a lighter tripod is necessary. This tutorial will go over the basics of what each part of the tripod is...
- Page 2 Button on back The toggle on the side unlocks the plate which can then be slid out by pressing the button on the back. The tension ring on the The plate also slides on and off from the back. side increases and decreases the tension This toggle loosens the arm on the tilt movement.
- Page 3 Spirit level at the back. The screw handle beneath the legs and head can be loosened to change the levelling of the head. You can check to see if the head is straight with the spirit level. Tripods, like all pieces of equipment, need to be packed in a certain way so that our tripods are protected, and you are comfortable carrying them.
- Page 4 Top of bag (head end) Most tripod heads house a spring, this is part of the counterbalance system they use to enable them to take heavier cameras. These springs are vulnerable to stretching and breaking. For this reason, tripod heads should be stored away flat and not tilted up or down.