Advertisement
Commissioning notes
Standards and certificates
Certified complete with plug-in base:
Building Technologies Division
Prior to commissioning, check to ensure that wiring is in an orderly state
When commissioning the plant or when doing maintenance work, make the following
safety checks:
Safety check to be carried out
a)
Burner startup with ionization cable
disconnected
Applied directives:
Low-voltage directive
Directive for gas-fired appliances
Directive for pressure devices
Electromagnetic compatibility EMC (immunity) *)
*) The compliance with EMC emission requirements must be checked after the burner control is
installed in equipment
Compliance with the regulations of the applied directives is verified by the adherence to
the following standards / regulations:
Automatic burner control systems for burners and
appliances burning gaseous or liquid fuels
Safety and control devices for gas burners and gas burning
appliances
Automatic electrical controls for household and similar use
Part 2-5: Particular requirements for automatic electrical
burner control systems
The relevant valid edition of the standards can be found in the declaration of
conformity!
Note on DIN EN 60335-2-102
Household and similar electrical appliances - Safety - Part 2-102:
Particular requirements for gas, oil and solid-fuel burning appliances having electrical
connections. The electrical connections of the LFL1.148 and the AGM comply with the
requirements of EN 60335-2-102.
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2008
ISO 14001:2004
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536
Anticipated response
Lockout at the end of safety time
(TSA)
2014/35/EC
2009/142/EC
2014/68/EC
2014/30/EC
DIN EN 298
DIN EN 13611
DIN EN 60730-2-5
CC1N7454en
20.11.2017
3/11
Advertisement
