Applying The Settings - Panasonic CF-U1 Series Additional Information

Barcode Configuration Utility

Applying the settings

To apply the settings for the Barcode Configuration Utility, follow the steps below.
1
Click [File]-[Save as] to create a configuration file (*.ini).
Name the configuration file (*.ini).
2
To reflect the setting contents to the Barcode module, click [Tools]-[Apply Configuration].
3
Restart the computer.
NOTE
Alternatively you can reflect the setting contents to the Barcode module in the following procedures.
Create and save the configuration file in Barcode Configuration Utility.
A
Apply the configuration file in the following procedures.
B
<For model with 1D Barcode Reader>
Input [c:\Program Files\Panasonic\bcr1d_set\bcr1d_set.exe x:\xxxxxxxx\xxxxxxxx.ini
[OK].
<For model with 2D Barcode Reader>
Input [c:\Program Files\Panasonic\bcr2d_set\bcr2d_set.exe x:\xxxxxxxx\xxxxxxxx.ini
[OK].
Restart the computer.
C
*1
Drive name, folder name and file name for configuration file.
After applying, the settings occur either in the Barcode module or the Barcode Key Emulator. You do not need to oper-
ate the 1D/2D Barcode Setting Utility every time when you restart the computer.
18
*1
] in [start] - [Run] and click
*1
] in [start] - [Run] and click