Important Service Notes (For U.k. Only); Specifications - Sharp DX-SX1H Service Manual

IMPORTANT SERVICE NOTES (FOR U.K. ONLY)

Before returning the unit to the customer after completion of a
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
Withstanding Voltage Tester
Test voltage
Set time
Set current (Cutoff current)
Unit
Judgment
OK: The "GOOD" lamp lights.
NG: The "NG" lamp lights and the buzzer sounds.
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
Channel:
Frequency range: 2 Hz - 100 kHz
Frequency
response:
Total harmonic
distortion:
Dynamic range:
Wow and flutter:
Output terminals: 1-bit digital output terminal
Other terminals:
set value
2,120 VPEAK
1,500 VRMS
60 secs
4 mA

SPECIFICATIONS

Stereo 2 channels
(Super Audio CD)
2 Hz - 50 kHz
(Super Audio CD)
2 Hz - 20 kHz
(CD)
0.0012 % (1 kHz, 2 V)
105 dB or more
(Super Audio CD)
Unmeasurable (less than
±0.001 % W. peak)
x 1
RCA coaxial digital output
x 1
Square type optical digital
output x 1
RCA analog output
(FIXED) x 1
RCA analog output (VARI-
ABLE) x 1
Headphone jack [3.5 mm
(1/8")] x 1
AC input x 1
WITHSTANDING
VOLTAGE TESTER
AC
Power source:
Power
consumption:
Dimensions:
Weight:
Specifications for this model are subject to change without
prior notice.
– 3 –
DX-SX1H
PROBE
+
OUT
-
UNIT
CONNECT THE PROBE
SHORT-CIRCUIT
TO GND
AC POWER
SCREW
SUPPLY CORD
230 V, 50 Hz
16 W
Width; 300 mm (11 - 13/16")
Height; 66 mm (2 - 5/8")
Depth; 382 mm (15 - 1/16")
Approx. 5.8 kg (12.79 lbs.)
OF CHASSIS