Mitsubishi Electric P-251TW-HK Installation Manual

Suspension Support Frame for Bathroom Thermo Ventilator
浴室換氣暖風機專用懸掛支撐框架
Model / 型號
P-251TW-HK
Installation Manual / 安裝手冊
This suspension support frame is for use when mounting a Bathroom Thermo Ventilator suspended from the ceiling.
Carefully read the Instruction Manual before installation and install the product correctly.
本懸掛支撐框架用於在天花板上懸掛安裝浴室換氣暖風機。
請事先仔細閱讀使用說明書，然後再正確安裝本產品。
Installation of this product is to be carried out by the distributor or installer from the place of purchase.
本產品的安裝應由購買地的經銷商或安裝人員進行。
Safety Precautions / 安全須知
The table below explains the degree of danger from incorrectly handling or using the product.
下表對產品不當處理或使用的危險程度進行了說明。
Caution / 注意
Securely install the product.
It could fall and cause an injury.
Wear gloves during installation.
Follow instructions
Failure to do so could result in injury.
遵照說明
Dimensional Drawings / 尺寸圖
12 x ø3.2 mounting hole
12 x ø3.2安裝孔
210
297
324
365
For Dealers and Contractors / 經銷商和承包商專用
Incorrect handling or use may result in minor injury or physical damage
to the house or household goods.
不當處理或使用產品可能會造成輕微傷害或對房屋或家庭用品造成物理損壞。
30
牢固安裝本產品。
可能會墜落而造成傷害。
安裝時請佩戴手套。
否則可能導致傷害。
■ Parts supplied / 隨附的部件
Suspension brackets: 2
●
懸掛支架：2
●
Suspension support frame: 1
●
懸掛支撐框架：1
●
Screws (4 x 6): 2
●
螺絲(4 x 6)：2
●
Rubber bushing
Suspension bracket
15 x 22 slotted hole
橡膠襯套
109
懸掛支架
15 x 22開槽孔
1901876H03601
Units (mm)
單位(mm)