Servicing The Engine Oil - Toro STX-26 Operator's Manual

Servicing the Engine Oil

Service Interval: After the first 8 hours—Change the
engine oil.
Before each use or daily—Check the engine-oil
level.
Every 100 hours—Change the engine oil.
Every 200 hours—Change the engine-oil filter.
Engine-Oil Specifications
Note:
Change the oil more frequently when the
operating conditions are extremely dusty or sandy.
Oil Type: Detergent oil (API service SF, SG, SH, or
SJ)
Crankcase Capacity: 2.1 L (71 fl oz) with the filter
removed; 1.8 L (61 fl oz) without the filter removed
Viscosity: Refer to the table below.
Figure 28
Checking the Engine-Oil Level
1. Park the machine on a level surface, engage
the parking brake (if applicable), and lower the
grinder.
2. Shut off the engine and remove the key.
g004216
24
Figure 29
g242254
g194611