Advertisement
Available languages
Available languages
With Windows 2000
On the Start menu, point to Settings and then click Network and Dial-
1
up Connections.
Right-click Local Area Connection and click Properties on the shortcut
2
menu that appears.
Select Internet Protocol (TCP/IP) and then click Properties.
3
Select Use the following IP address and then enter 192.168.11.xxx in
4
the IP address box and 255.255.255.0 in the Subnet mask box.
Click OK.
5
With Windows Me
On the Start menu, point to Settings and then click Control Panel.
1
Right-click Network.
2
Select TCP/IP - "network card name" and then click Properties.
3
If there is no such item in the list, click Add. In the Select Network
Component Type dialog box, select Protocol, click Add and then add
a TCP/IP.
On the ID address tab, select Specify an IP address and then enter
4
192.168.11.xxx in the IP address box and 255.255.255.0 in the Subnet
mask box.
Click OK.
5
Restart your computer.
Case 14 - The Wireless LAN PC Card or Wireless LAN
Converter is set up correctly, but I still cannot connect
to the Access Point.
Use the Access Point setup page to verify whether access control settings
are made.
Case 15 - Usable channels
When using any of the following Sony Wireless LAN PC Cards, you can use
the channels outlined below:
UNIT
PCWA-C100
PCWA-C150S
PCWA-C300S
CHANNELS
1 to 11
1 to 11
1 to 13
13
Advertisement
