All manuals and user guides at all-guides.com WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Page 3
All manuals and user guides at all-guides.com 11.1. Simple check…………………………………………………………..…………...53 11.2. PSU failure check…………………………………………………..………………54 11.3. DC/DC board failure check………………………………………………...……...55 11.4. Main board failure check…………………………………………………………. .55 11.5. Pannel failure ……………..…………………………………………………………57 12. MAINTENANCE……………………………………………………………………………60...
All manuals and user guides at all-guides.com 1. Specification Model HL15T Screen size 15.4inch Aspect ratio 16:10 Resolution 1280*800 Response Time(ms) Angel of view H:90/V:45 Color display 262,144 NO.of preset channels OSD language English/Spanish/French Color system NTSC Audio system Audio output 2×1.5W...
Page 5
All manuals and user guides at all-guides.com 2. Warning WARNING RISKELECTRIC SHOCK DONOT OPEN WARNING: To reduce the risk of electric shock don’t remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire.
Page 6
All manuals and user guides at all-guides.com FC C STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 7
All manuals and user guides at all-guides.com product unless proper ventilation is provided. 8)Power Source ---this TV should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.
All manuals and user guides at all-guides.com Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.
Page 9
All manuals and user guides at all-guides.com Process signal which incept from exterior equipment,then translate into signal that panel can display. 3.2.2 Connector definition Main board connector Power connectors(CN3,CN5) Pin number Signal name Pin number Signal name +12VEXT +12V +12VEXT BLON PWR-ON Notes:...
Page 10
All manuals and user guides at all-guides.com RXE2- LVDS EVEN 2 - Signal RXE2+ LVDS EVEN 2 + Signal 13,14 Ground RXEC- LVDS EVEN Clock - Signal RXEC+ LVDS EVEN Clock + Signal RXE3- LVDS EVEN 3 - Signal RXE3+ LVDS EVEN 3 + Signal RXO0- LVDS ODD 0 - Signal...
Page 11
All manuals and user guides at all-guides.com Pin number Signal name Description GPIO GPIO PB_IN PB1 IN Y_IN Y1_IN PR_IN PR1 IN DVD IR DVD AUDIO Connector: P1 Pin number Signal name Description YPBPR1L_IN YPBPR1R_IN Other connectors: 1, CN19 to Upgrade the program of MTK5380(U13) AND FLASH(U17) +3V3SB 1 U0RX U0TX...
All manuals and user guides at all-guides.com +12V +12V 3.4. LCD PANNEL. 3.4.1 Function Description: Display the signal. 3.4.2 Connector definition Pin number Signal name Description Power Power for panel Ground RXE0- LVDS EVEN 0 - Signal RXE0+ LVDS EVEN 0 + Signal RXE1- LVDS EVEN 1 - Signal RXE1+...
LVDS EVEN Signal EVEN 19-24 LVDS LVDS ODD Signal 4. FEATURES AND TECHINICAL DESCRIPTION Factory model(reference only) L15T1W-A HAC model HL15T Tuner Integrated NTSC&ATSC Video Signal System NTSC/ATSC(8VSB,Clear QAM) Digital Comb Filter Video Noise Reduction Stereo Surround Sound MTS Stereo...
Page 14
All manuals and user guides at all-guides.com Sleep Timer External Equipment Connections Accessories Remote Control User Manual Battery Antenna Connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna . location and antenna positioning ■...
All manuals and user guides at all-guides.com for assistance. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources.
Page 16
All manuals and user guides at all-guides.com How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the Y, Pb, Pr jacks on the TV and connect the DVD audio outputs to the YPbPr Audio IN jacks on the TV, as shown in the figure. 2.
Page 17
All manuals and user guides at all-guides.com Digital Audio Output Send the TV`s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
Page 18
All manuals and user guides at all-guides.com R eso lu t i on Fra me Mo de Re sol uti on fre q ue ncy (Hz) 64 0*4 80 60Hz SVGA 80 0*6 00 60Hz/75Hz 60 Hz 1024*768 75 Hz 85 Hz Connecting Headphones You can connect a set of headphones to your set if you wish to watch a...
All manuals and user guides at all-guides.com should return to normal operation. Take the table stand off You can take off the table stand if you don’t want to use the table stand. HL15T Please release the screw 2×M4, See the picture 7. OPERATION INSTRUCTIONS Basal information 7.1 Front panel controls...
All manuals and user guides at all-guides.com 7.3 Setting Up Your Remote Control 8. DISASSEMBLY INSTRUCTIONS 8.1.whole machine The whole machine includes Packaging subassembly、Front-frame subassembly、Back-cover...
All manuals and user guides at all-guides.com subassembly、Base subassembly、MAINBOARD SUBASSEMBLY、Remote Control Board Subassembly、Control Board Subassembly、Assembly Material Subassembly、Romoter Contral Per-setting Subassembly. 3..3 Components List Name Description Parts number HL15T whole machine Packaging Base subassembly Rear cover subassembly Front Frame Subassembly Control Board Subassembly Remote Control Board Subassembly Mainboard Subassembly 8.2.
Page 23
All manuals and user guides at all-guides.com Spare Location Spare Parts Name Subassembly parts Specification in English number Base subassembly Base pannel Base subassembly Iron patch Bolt SJ2824-87 ST3×10F 8.3. Rear cover subassembly Components List Spare Location Spare Parts Name Subassembly parts Specification...
All manuals and user guides at all-guides.com Speaker Y37-2W/4OHM Power Cord 2.1 Meter Power Cord Magnetism annulation ECIK-EL6E-B Rear cover Copper tessera Rotate axis Rotate axis board Bolt SJ2825-87 ST3*6F Terminal board Rear terminal label Bolt SJ2824-87 ST3X10F Metal clip Cloth sponge bar Bolt...
Page 25
All manuals and user guides at all-guides.com Spare Location Spare Parts Name Subassembly parts Specification in English number Front frame subassembly Front frame Adornment show lamp Front FRAME Net cloth Subassembly POWER switch Key board button bracket Button cap Cloth 8.5.
Page 26
All manuals and user guides at all-guides.com 8.5.2 Components List Spare Spare Parts Location Subassembly parts Name in Specification number English Assembly Assembly Material Material Subassembly Subassembly LVDS Wire LVDS Wire Connective Wire PH-12P-570mm-PH-7P-450mm-PH-6P Power Mainboard (TJC3-7)-500mm-(TJC3-7) Inverter Connective Wire Power Supply PCA050FA-011-P-R Board...
All manuals and user guides at all-guides.com Metal piece(L) Metal pieceL(R) M2*3.5 Bolt M3*5 Bolt SJ2825-87 ST3×10F Bolt SJ2824-87 ST3×10F Bolt GB9074.4-88 M4×12 Bolt SJ2824-87 ST3×10F Bolt SJ2824-87 ST3×10F Bolt SJ2824-87 ST3×10F Bolt Clip SJ2824-87 ST3*8F Bolt SJ2824-87 ST3*8F Bolt 9.
Page 28
All manuals and user guides at all-guides.com 9.1 Version ,S/N, Panel Resoution Version:The first line is the model Name and the second line is current software version. 9.2 Video 9.2.1,Auto Color The option could only be used in the VGA and Component model. When we found the color in the two models was abnormal.
Page 29
All manuals and user guides at all-guides.com The function could adjust the Color Temperature., used when debugging. 9.3 Audio Dolby Banner: When turn it “ON”, the model will be in Dolby authentication state. Compression: Compression style. RF: atv line:AV/S-Video/YPbPr/VGA Compression Factor: Compression state. Downmix: output model.
Page 30
All manuals and user guides at all-guides.com Range Scan: The function could make it to search the channels by differentiation the analog and digital channels. Single RF Scan: Search channels in the frequency scope set in advance. Factory Scan: According to ANTENNA-ANALOG---〉ANTENNA-DIGITAL---〉CABLE- ANALOG---〉 CABLE- DIGITAL to search channels, used only in project debugging.
Page 31
All manuals and user guides at all-guides.com Tuner Diagnostic: Project debugging setting, used to inspect the audio function. 9.5Gamma Gamma: Bright:GAMMA0.8 Middle:default settings in the programme Dark:GAMMA1.2 9.6 Backlight Backlight: adjust the backlight.
Page 32
All manuals and user guides at all-guides.com 9.7 Function Burning Mode: Turn it “ON” to enter the aging model, This is for factory run-in testing. The screen would display red, green, blue and black screen repeatedly. Each color screen could be exam at that time.
All manuals and user guides at all-guides.com Clean Storage:The function could make the model turn back to the factory default setting. Remark: The date of the chart only is a example,please don’t adjust the factory mode base on it. 10. CIRCUIT DIAGRAM...
Page 34
All manuals and user guides at all-guides.com MT5380 (DDR1) +3V3SB NEED TO CONFIRM MODEL NAME: MT5380P1-V2 20070620 XINGQI R1701 R1703 75 R0603/SMD R1702 ADIN1 R1704 2K R0603/SMDC628 D161 0.1uF MLVS0603M07 R1705 5K6 R0603/SMDC/SMD/0603 C629 01. INDEX INVR PWR Main PWR 1000pF JATG,J2 R1706 18K...
All manuals and user guides at all-guides.com 12. TROUBLE SHOOTING GUIDE 12.1. Simple check Verify if the television is properly plugged No Picture,no sound Verify if the television is properly supplied power Verify if electricity is available Verify if correct signals are input Press INPUT button to change signal input to TV input Blank screen Restart the television of power supply is interrupted...
Page 50
All manuals and user guides at all-guides.com voltage : +12V ,+12V connector:CN6(P6,P7) 12.3 Main board failure check State:No picture First,check cables which connect with PSB and the Lvds wire with the panel. Second, check the output voltage of CN4 Connector: CN4. State:No sound First,check cables which connect with Main Board,then check as follows First,check speaker anode(+) and cathode(-),confirm speaker short or not.
Page 51
All manuals and user guides at all-guides.com Bright dot dark Incoming Inspection Standard Dot Defect dot in pannel Panel or Polarizer Bladder Polarlzer Bladder between Polarizer and top glass Bubble Polarizer Polarizer Tine or rigidity arose Polarizer Scratch Scratch inside Eyewinker inside Eyewinker inside Polarizer Polarizer...
Page 52
All manuals and user guides at all-guides.com Abnormal Only color Capacitance improper bring crosstalk inside LCD Color abormal pannel 1.Chip lose action Only color 2. IC short or jointion bad Abnormal abnormal 3.Pannel and vsc connect bad Color Failure Mode Part Name Description...
Page 53
All manuals and user guides at all-guides.com Brightness Light bottom of LCM B/L unit badness leakage brighter than normal Mechanlcal B/L brightness Sheet in B/L unit is uneven Uniformity or B/L asymmetric Lack screw or *Lack screw Mount hole Screw damage screw damage 13、...
Page 54
All manuals and user guides at all-guides.com Sincere Forever...