Inspection And Maintenance Table - Hitachi ZW370 Technical Manual

ZW370 FS 00-6
00 General Information
Outline

Inspection and maintenance table

Refer to Operation & Maintenance Manual for mainte-
nance procedures.
Section
Check Engine Oil Level
Check Engine Coolant Level
Check Warning Lamps
Check Exhaust Gas
Drain Water and Sediment from Fuel Filter
Check Fuel Level
Check Drive Belt
Check Crankcase Breather Tube
Check Air Intake System
Check Cooling Fan
Drain Water and Sediment from Fuel Tank
Replace Fuel Filter Cartridge
Replace Engine Oil and Oil Filter Cartridge
Add DCA4 Coolant Additive
Engine
Inspect Automatic Belt Tensioner Pulley
Replace Fuel Tank Breather
Replace Coolant Filter Cartridge (One year or 1500 hours
whichever comes first.)
Clean Fuel Tank
Check and Adjust Valve Lash Clearance
Check Vibration Damper
Check Engine Compression Pressure
Check Injection Pressure
Clean Crankcase Breather Tube
Clean or Replace Air Cleaner Element
Clean Radiator / Air cooler / Hydraulic oil cooler / Fuel
cooler Fins
Clean or Replace Air Cleaner Element
Replace Coolant
Item for check
IMPORTANT
Severe application require more frequent mainte-
nance.
Severe conditions include heavy dust, extremely
abrasive material, caustic chemicals, extremely wet
conditions or abnormally hot or cold ambient temper-
atures.
: First time replacement or cleaning only
Operating hours
10 50 250 500
One year or 1500 hours
After six cleanings or once a year
Every 2 years or 3000 hours
When
Required
1000 1500 2000