Fine Tuning; Channel Guide - Sanyo AVM-27D6 Instruction Manual

SET-UP

FINE TUNING

If the reception is clear, you do not have to fine-tune the channel, as this is done automatically
during auto program and manual memory.
If, however, the signal is weak or distorted, you may have to fine-tune the channel manually.
1. Press CH / buttons or use the number buttons to select a channel you want to adjust.
2. Press MENU button, move the cursor to "SET UP" option and press VOL + button. The "SET
UP" menu is displayed.
MENU
PICTURE
SOUND
TIME
SET UP
FUNCTION
SEL. + ENTER
3. Press CH / buttons to place the cursor on the "FINE TUNE" option.
4. Use VOL + / - buttons until you obtain a sharp and clear picture and good sound quality.
SET UP
* ANTENNA : TV 2
* AUTOPROGRAM
* FINE TUNE : 00
* CH GUIDE
* CH GUARD
SEL. ADJ. A/D: MEMO
5. If you wish to memorize the fine-tuned frequency for the channel, press ADD/DEL button. The
[ ] symbol (red color) appears to the right of the channel number. To delete the memory,
press the same button again. The [ ] symbol disappears.
NOTES The AFT (Automatic Frequency Tuning) mode does not operate on the channels
that are fine-tuned.
After the Auto Channel Programming has been performed, memorized channels
are automatically tuned to their optimum frequencies.
16
All manuals and user guides at all-guides.com
SET UP
* ANTENNA : TV 2
* AUTOPROGRAM
* FINE TUNE : 00
* CH GUIDE
* CH GUARD
SEL. ADJ. A/D: MEMO
SET UP
* ANTENNA : TV 2
* AUTOPROGRAM
* FINE TUNE : 12
* CH GUIDE
* CH GUARD
SEL. ADJ. A/D: MEMO
SET-UP

CHANNEL GUIDE

You can choose up to 5 channels and assign them to the Channel Guide (CH GUIDE).
This function allows you to select your favorite channels easily.
CH GUIDE PRESETTING
1. Press CH / buttons or use the number buttons to select a channel you want.
2. Press MENU button, move the cursor to "SET UP" option and press VOL + button. The "SET
UP" menu is displayed.
MENU
PICTURE
SOUND
TIME
SET UP
FUNCTION
SEL. + ENTER
3. Press CH / buttons to place cursor on the "CH GUIDE" option and press VOL + button.
The "CH GUIDE" menu is displayed.
4. Press CH / buttons to select your favorite channel and press a number button (1 to 5) on
the remote control.
Then the cursor will be at the "LETTERS" option.
CH GUIDE
CATV 23
* GUIDE NO : -
* LETTERS : - - - -
PRESS 1-5 NOW
A/D : MEMO. SEL.
MENU : EXIT. MOVE
The color of the first selected character (-) will change from cyan into white.
17
SET UP
* ANTENNA : TV 2
* AUTOPROGRAM
* FINE TUNE : 00
* CH GUIDE
* CH GUARD
SEL. + ENTER
CH GUIDE
CATV 23
* GUIDE NO : 1
* LETTERS : - - - -
A/D : MEMO. SEL.
MENU : EXIT. MOVE