Toshiba RAD-Y200H Instruction Manual page 33

Maintenance notes (continued)
3-in-1 Multi function filter (once every 2 weeks)
The dirt of the filter can be cleaned by a vacuum
cleaner
Slow down the suction power of the
vacuum cleaner.
Remove the filter frame and take out the 3-in-1 Multi
function filter
Use a vacuum cleaner to clean up the dust on the 3-
in-1 Multi function filter and then wash it with water.
Wipe dry water with a towel and dry it in a well-
ventilated place.
Install after fully drying.
Prohibited items for 3-in-1 Multi function filter:
a. Do not use water other than tap water for dry cleaning
b. Do not rub the filter
c. Can not be heated and dried
d. Don't dry it under direct sunlight
e. Do not apply physical pressure when dry
Product Model
RAD-Y200H、RAD-
Y250H、 RAD-Y300H
Filter
Item No
41226233
Filter
3-in-1 Multi
function filter
15