Digital Wrench® Communication Errors; Digital Wrench® - Diagnostic Connector; Digital Wrench® Serial Number Location - Polaris RANGER 500 2017 Service Manual

GENERAL INFORMATION
4. Once the installation is complete, launch the Digital
Wrench® software and verify the information in the
lower, right-hand corner matches the new Base
Version you just installed.
DIGITAL WRENCH® COMMUNICATION
ERRORS
If you experience problems connecting to a vehicle, or
any other Digital Wrench® software-related problem, visit
the Digital Wrench® home page (www.polaris.diagsys.
com) and locate the following information under
Knowledge Base:
• Errors and Troubleshooting
• Frequently Asked Questions (FAQs)
• Procedures and Solutions
1.72
DIGITAL WRENCH® - DIAGNOSTIC
CONNECTOR
The diagnostic connector
shown.
DIGITAL WRENCH® SERIAL NUMBER
LOCATION
To locate the Digital Wrench® serial number, do the
following:
1. Launch the Digital Wrench® software.
2. On the Digital Wrench® main screen, select the
'Configure the Diagnostic System Software' menu
icon.
3. Locate the serial number on the right side of the
System Configuration screen.
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
q
is located under the hood as
© Copyright Polaris Inc.