Steering Wheel Removal (Eps Models) - Polaris RZR 570 2013 Service Manual

STEERING / SUSPENSION
6. If replacing the upper steering shaft or steering
wheel, refer to Chapter 5 –Steering Wheel Removal
(EPS Models), page 8.8.
STEERING WHEEL REMOVAL (EPS
MODELS)
1. Remove the upper steering shaft, pivot tube and
steering wheel as an assembly before attempting to
remove the steering wheel. Refer to Upper Steering
Shaft Removal (EPS Models), page 8.7.
CAUTION
Striking the steering wheel or steering shaftwhile
installed in the vehicle can permanently damage the
EPS unit and cause aPower Steering Fault.
2. Remove the steering wheel cap.
3. Loosen the nut and back it half way off the steering
shaft.
4. Place the assembly in a vise.
8.8
5. Using a large bronze drift and hammer, strike the
steering shaft nut to pop the steering wheel off the
shaft taper.
6. Once the steering wheel pops loose, completely
remove the nut and lift the steering wheel off the
shaft.
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.