Table of Contents
Advertisement
Before first use
Heating up the drawer for the
first time
Remove any protective film.
Remove the non-slip liner from the
drawer.
Clean the non-slip liner with hot water
and liquid dish soap, applied with a
clean sponge cloth or a clean, damp
microfiber cloth.
Dry the non-slip liner with a soft cloth.
Before heating it up, wipe the drawer
inside and out with a damp cloth to
remove any dust or left-over
packaging.
Dry all surfaces with a soft cloth.
Replace the non-slip liner in the
drawer.
Heat the drawer for at least two hours.
Tap the On/Off button.
Touch the Menu sensor button
repeatedly until the symbol lights
up.
Touch the Temperature sensor button
repeatedly until the segment on the
far right-hand side of the temperature
display lights up.
Touch the Duration sensor button
repeatedly until 2 h lights up.
Close the drawer.
The drawer will switch itself off
automatically after two hours.
44
The drawer is equipped with a contact
switch. This ensures that the heating
element and fan in the appliance only
work when the drawer is closed.
Because the metal components are
protected by a conditioning agent, there
will be a slight odor the first time the
drawer is heated up. The harmless odor
will dissipate after a short time and
does not indicate a faulty connection or
appliance defect.
During this time, make sure that the
kitchen is adequately ventilated.
Advertisement
Table of Contents
