Epson GT-15000 Operation User's Manual

Epson GT-15000 Operation User's Manual

Flatbed scanner
Hide thumbs Also See for GT-15000:

Advertisement

Quick Links

Scanner Parts
Ready light
Error light
Start
button
Power button
IEEE 1394 optional
interface slot
SCSI terminator switch
ADF interface
SCSI interfaces
Document cover
Document table
AC inlet
Transportation lock
12/03
Scanner Specifications
General
Scanner type
Flatbed, color
Photoelectric
device
Color CCD line sensor
Effective pixels
7020 × 10200 pixels (at 600 dpi)
Color depth
48-bit internal/24-bit external
Grayscale depth
16-bit internal/8-bit external
Maximum
document size
11.7 × 17.0 inches (297 × 432 mm);
the reading area can be specified from your
software
Resolution
600 dpi (optical)
Maximum hard-
ware resolution*
600 dpi (main scan); 1200 dpi with Micro
Step Drive (sub scan)
* The maximum hardware resolution of
600 × 1200 dpi is achieved using
EPSON's Micro Step Drive technology
Output resolution 50 to 9600 dpi
Maximum inter-
polated resolution 4800 dpi
Speed (600 dpi,
draft mode)
Color: 3.8 msec/line (approx.)
Grayscale: 1.3 msec/line (approx.)
Line Art: 1.3 msec/line (approx.)
Color separation
RGB color filters on CCD
Reading sequence Monochrome: One-pass scanning
Color byte sequence: One-pass scanning
(R, G, B)
Color line sequence: One-pass scanning
(R, G, B)
Zoom
50 to 200% in 1% increments
Command level
ESC/I-B7
FS
Pixel depth
16 bits per pixel input, 1 to 8 bits per pixel
output
Brightness
7 levels
Line art settings
Fixed threshold
TET (Text Enhancement Technology,
enable/disable selectable)
EPSON GT-15000
EPSON GT-15000 - 1

Advertisement

Table of Contents
loading

Summary of Contents for Epson GT-15000

  • Page 1 Step Drive (sub scan) Start button * The maximum hardware resolution of 600 × 1200 dpi is achieved using EPSON’s Micro Step Drive technology Output resolution 50 to 9600 dpi Maximum inter- polated resolution 4800 dpi Speed (600 dpi, draft mode) Color: 3.8 msec/line (approx.)
  • Page 2: Safety Approvals

    Standby: approximately 7.5 W Interface type Universal Serial Bus Specification, Rev. 2.0 Electrical standard Full speed mode (12Mb) and High speed mode (480 Mbps) of Universal Serial Bus Specification Revision 2.0 Connector type One receptacle (Type B) 2 - EPSON GT-15000 12/03...
  • Page 3: Ieee 1394 Firewire

    Initialized when the scanner is turned on or the USB cable is plugged into the USB port on the scanner Software: Initialized when the software sends the Esc @ command or the scanner receives a Bus Reset from the USB interface 12/03 EPSON GT-15000 - 3...
  • Page 4: Unlocking The Scanner

    Clock synchronization with DS-Link Encoding/ decoding DS-Link Logic level 3.3 V Compatible connectors IEEE 1394-1995 compatible Power class Power class code 100 No power supply from external sources Fitted with a repeat function with bus power 4 - EPSON GT-15000 12/03...
  • Page 5: Scanner Lights

    Professional Mode: Lets you manually configure advanced image settings, including the histogram setting, tone, color depth, balance, saturation, brightness, and contrast. You can use EPSON Scan either in a “stand-alone” mode, or by starting from another program, such as PaperPort Deluxe Power button or Photoshop Elements.
  • Page 6: Scanning To A File With Epson Scan

    Simply lift the back of the cover straight up. When You can use the a Start button to open EPSON Scan, and you reattach the cover, line the rods up with the positioning holes and lower the cover into place.
  • Page 7: Transporting The Scanner

    Related Documentation decrease the scanning quality. Never use alcohol, thinner, or corrosive solvent to clean the CPD-17264 EPSON GT-15000 User’s Guide scanner. These chemicals can damage the scanner EPSON GT-15000 Software Reference components as well as the case. Guide (html) Be careful not to spill liquid into the scanner mechanism or electronic components.

Table of Contents