Advertisement
Cut out the parts
Assembling the propeller
Fold the parts you have cut out.
Assembling the shaft
Put the part face up on the edge of a table
and roll it while applying pressure,
to give the part a curve.
Paper Copter /
Assembly Instructions
Assembling the paper copter
Attach the propeller parts you have curved
into a ring shape.
Fold the edge to make a triangular prism,
and then roll it up into a stick
(about 5mm in
Glue
diameter).
Once the glue is completely dry,
cut out the part by following
the scissors line on the front.
For other parts, simply cut them out
along the scissors lines.
Glue
Fold along the fold line and
glue together at the back.
Glue
Finally, glue down the end
so that it doesn't get unraveled.
Advertisement
