Remove The Ss-Board; Remove The Support Metal; Remove The Hanger Metals And The Stand Brackets - Panasonic TH-P58V10M Service Manual

8.15. Remove the SS-Board

1. Remove the Tuner unit. (See section 8.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS53, SS55 and SS56).
5. Disconnect the bridge connector (SS03-SS22).
6. Remove the screws (×6

8.16. Remove the Support metal

1. Remove the screws (×2
2. Remove the Support metal.
) and remove the SS-Board.
, ×2
).
8.17. Remove the Hanger metals and
the Stand brackets
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the Support metal. (See section 8.16.)
3. Remove the Hanger metals (L, R) fastening screws (×6
each) and remove the Hanger metals (L, R).
4. Remove the Stand brackets (L, R) fastening screws (×4
each) and remove the Stand bracket covers (L, R)
and the Stand brackets (L, R).
24