Babysit Mode - Philips 5250 User Manual

Handset
Registration
The additional handset will get full capability when it is registered to the base station (see p. 1).
You can register up to 6 handsets to the DECT 521 or DECT 525 base station.
To register a handset
Unplug and plug back in the mains supply to put the base in registration mode and start the
following procedure immediately after that.
Press to enter the carousel menu.
Scroll to Handset and press
Scroll to Registration and press
Press to select Register handset.
Enter the 4-digit RC code written on the sticker placed under the base and press
.
To unregister a handset
Press to enter the carousel menu.
Scroll to Handset and press
Scroll to Registration and press
Scroll to Un-register handset and press
Choose the handset to un-register from the list and press
Enter the 4-digit RC code and press
Note: should you have your handset serviced alone, please make sure it is unregistered from the
base station before taking it back to the repair centre.

Babysit mode

This feature allows you to monitor the baby’s room. Place the handset in the room to be
monitored and you will hear the noise coming from the room on the additional handset.
To activate/deactivate the babysit mode
Press to enter the carousel menu.
Scroll to Handset and press
Press to select Babysit mode.
Select ON or scroll to OFF and press
Note: an intercom is necessary to monitor the room (see page 8).
All manuals and user guides at all-guides.com
to select.
to select.
if there are at least 2 handsets
to select.
Handset
to select.
to select.
to select.
.
to confirm.
.
5