Switch Operations - Canon CJ12ex4.3B Operation Manual

5 OPERATION

5-6. SWITCH OPERATIONS

Functions can be assigned to the five switches: the VTR, RET, AUX switches, or AUX1 and AUX2
switches on the information display. VTR, RET, Shtl, and Fr1P functions are assigned respectively by
default.The following steps explain how to assign the functions to the switches in basic mode.
For details, refer to "Information Display Manual" in the supplied CD-ROM.
MENU
Fr1P
A
Shtl
A 1
[ I-Tq ] H
③ AUX switch
Switch name
VTR
RET
Fr1P, Fr2P
Fr1F, Fr2F
Sped
Shtl
NON
1
Press the DISPLAY switch to turn on the display.
IG:50
2
[Trk]OFF After using the control key to select the name of the switch key to which
the function is to be allocated, press the Set key. The name of the
Fr1P
A2
[ Z.M. ]
switch and the default or the previous setting now blink on the display.
3
Press the left or right key until the function to be changed to appears
on the display.
4
Press the Set key. This completes the setting.
A
Switch
R
② RET switch
V
① VTR switch
Start/stop VTR operation.
Hold down to view the main-line video on the view finder.
Press to move to the stored zoom/focus position.
One position can be stored/called for Fr1P and Fr1F, and another for Fr2P and Fr2F.
Press to move in the stored zoom direction (toward the telephoto end or the widest
angle end) at the stored zoom speed.
Press to move to the stored zoom position at the maximum speed. Release to return
to the previous zoom position at the maximum speed.
No function
Default
value
Fr1P Fr1F
① V VTR
● ●
② R RET
● ●
③ A Fr1P
● ●
④ A1 Shtl
● ●
⑤ A2 Fr1P
● ●
•
" " indicates a combination of an assignable function and a switch.
(4) and (5) are AUX1 and AUX2 switches on the zoom demand.
Description
E18
Functions
Fr2P Fr2F Sped Shtl NON
● ● ● ●
● ● ● ●
● ● ● ●
● ● ● ●
● ● ● ●
VTR RET
● ●
● ●
● ● ●
● ● ●
● ● ●