Two-Sided Printing (Two-Sided Printing) - Canon ImageRunner 5000 Series User Manual

Two-sided Printing (Two-sided Printing)

IMPORTANT
• In the Two-sided Printing mode, combined use with the Booklet mode cannot be set.
• Non-standard paper sizes cannot be used to make two-sided prints.
NOTE
• Print paper used to make two-sided prints must conform to the following specifications.
- Paper size : 11"x17"/ LGL/ LTR/ LTRR/ STMTR
- Paper weight : 17-lb bond to 110-lb index (64 g/m
There are some types of paper which may meet the above specifications, but cannot be used to print in
the Two-sided Printing mode.
• When printing an odd numbered document, the back of the last page is left blank. (The machine's counter
does not count the blank page as a print.)
• Two-sided printing (printing on both sides of paper) when there are different-sized originals for the front
and back sides, will result in each original being printed on one side of paper that matches its size. When
you want to make prints on both sides of the paper with different-sized originals, make sure to select the
paper size you want to print on, before printing.
1
Specify the desired document following procedure below.
Select the desired box number, then the desired document
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
2
Press the [Change P Settings] key.
3
Press the [Two-sided Printing] key.
NOTE
• When you press the [Initial Settings] key, the docu-
ment recorded from a personal computer returns to
the former settings and the scanned document
returns to the standard mode of the Local Printing.
Printing a Document Stored, in a Box after Changing the Settings
2 2
to 200 g/m )
Two-sided Printing
4-67