Care And Cleaning; Sealed Burner Assemblies - GE Caf�© C2S980SEMSS Owner's Manual & Installation Instructions

Care and cleaning of the range.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
Front right burner
Burner
cap
Burner
head
Electrode
Burner
base
Make sure the hole in the burner
head is positioned over the electrode
and that the burner head is fully
inserted inside the burner base.
A small gap between the base and
head is normal.
Front left burner, back right burner
and back left burner
Burner cap
Burner head
Stability
Use a
sewing
chamber
needle or
twist-tie to
unclog the
small hole
in the
Burner base
Electrode
burner
head.
Make sure the slot in the burner
head is positioned over
the electrode.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is re-engaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.

Sealed Burner Assemblies

Turn all controls OFF before removing the
burner parts.
The round side burner caps and burner
heads can be lifted off, making them easy
to clean. The electrodes are not removable.
The oval center burner head and cap
assembly can be lifted off, making it easy
to clean. The burner electrode is not
removable.
CAUTION:
cooktop without all burner parts and grates
in place.
Electrode
Front left, back
right and back left
burner
Center
The electrode of the spark igniter is
griddle
exposed when the burner head is
removed. When one burner is turned
Burner
to LITE, all the burners spark. Do not
head and
attempt to disassemble or clean around
cap
assembly
any burner while another burner is on.
An electric shock may result, which
Electrode
could cause you to knock over hot
cookware.
ge.com
Do not operate the
Burner head
Electrode
Burner
base
Front right burner
31