Scanner Settings - Canon DR-5060F Instructions Manual

Scanner Settings

Set the basic scan condition items.
Mode:
Select the scanning mode.
[Black and White]
This setting scans the image completely in black and white.
[Black and White ED]
This setting scans the image completely in black and white. Halftone gray areas
are simulated and reproduced using error diffusion.
[Grayscale - 4 (16, 256) Level]
Reads scanned images as grayscale data. Use this item when grayscale data
is required, for example, when scanned images must be image-processed on
the computer.
Resolution:
Set the resolution (dots per inch: dpi) when originals are scanned. You can
select from five resolutions: 200, 200 (high-speed), 240, 300 and 300 (high-
speed).
MEMO
In high-speed scanner modes such as 200 (high-speed) and 300 (high-speed),
the resolution in the sub-scanning (vertical) direction during scanning is halved
to speed up scanning.
In the 200 (high-speed) mode, images scanned in at 200
vertical) are output at 200
images scanned in at 300
300 dpi. In either of these modes, scan speed is increased, but image quality is
slightly impaired.
200 dpi, and in the 300 (high-speed) mode,
150 dpi (horizontal
100 dpi (horizontal
vertical) are output at 300
Setting Basic Scan Conditions
2
23