Advertisement
(4) Click on "Search for device servers" and input "192.168.0.255" and select "Add" as
shown below and select "OK".
Broadcast Address to be used
If you did not use the default parameters for SX-2000WG+, please use the relevant
broadcast address. If you are not sure, please ask the network administrator.
(5) Click on the USB device entry listed in the window and select button below.
SX-2000WG+ is not listed
If SX-2000WG+ is not listed in the window, please refer to Trouble Shooting 7(2) to make
sure the device server is working and the connection is established. If the ping command
does not work properly, please check the settings of SX-2000WG+ and GW-US54Mini2W.
All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
FX
FX-DUO
22
Advertisement
