Auto Redial - NEC DS1000 Manual

Features

Auto Redial

DS1000/2000 Feature Handbook Supplement
Auto Redial periodically redials a busy outside number. If you place an outside call and the call
recipient is busy, you can press a soft key to enable Auto Redial. You don't have to retry the num-
ber, hoping it will go through.
Auto Redial will periodically retry the number up to 15 times. Auto Redial cancels when the called
party rings or answers, or when you:
G
Place or answer another outside call.
G
Receive an Intercom voice announcement or answer an Intercom call by lifting the hand-
set or pressing SPK .
G
Press SPK to cancel Auto Redial.
G
Press any other fixed feature key except MIC .
G
Lift and replace the handset.
G
Press the CANCEL soft key (Super Display only).
To enable Auto Redial:
1. Place an outside call and receive busy tone + Press AUTO REDIAL (ALND) soft key.
OR
2. Press a line key + Press AUTO REDIAL (ALND) soft key.
The system enables Auto Redial for the last outside call you dialed.
3. At a 22-Button or 34-Button Display, you see:
At a Super Display, you see:
The display shows the interval between callout attempts (e.g., 30 seconds), as well as
how many times redial has occurred (e.g., 1 of 15).
Your SPK key winks on to indicate your phone is in the Auto Redial mode.
4. The system periodically redials the call, up to 15 times, or until you:
G
Place or answer another outside call.
Features
1