Timer Recording With Vcr Plus; Setting Up The Channel List; Using Vcr Plus - GE VG4262 User Manual

RECORDING
6. Review the information to make sure it is correct, and then
press MENU to save.
Program 1 (One Time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/28/97 TUES
Tape Speed SLP
1=SP 2=SLP
Press CLEAR to correct
Press MENU to save

Timer Recording with VCR Plus+

You can use VCR Plus+ to simplify timer programming if you
have cable TV and don't receive all channels through a cable box
or if you receive your TV signal off-air.

Setting Up the Channel List

If you did not set up the VCR Plus+ channel list, you can do it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List menu.
3. Go to Setting Up Your VCR if you need more information on
setting up your VCR Plus+ channel list.

Using VCR Plus+

1. Press MENU to bring up the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 1 to display the VCR PLUS+ menu.
VCR PLUS+
Enter PlusCode Number
(from TV listing)
_
Press MENU to cancel
VCR Plus+ and PlusCode are registered
trademarks of Gemstar Development Corporation.
26
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
CHANNELS
6 Audio
7 Language
1 Auto Channel Search
0 Exit
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
VCR+ Channel My Channel
5
4
0 Exit
3 -> -> -> 23
2
1
Use CH+/- to select
Press 0-9 to change
Press MENU to save
If you receive all channels through your
cable box on Channel 3 or 4, you must
use the regular Timer Recording
method to record programs.
46
--
--
--