Advertisement
Wall mount usage
To mount the UPS Backup Battery System on the wall:
1. Ensure the "UP" arrow on the Mounting Plate is facing upward and place it on the wall
where you want to mount it. [See image 3]
2. Attach the Mounting Plate to the wall using at least 4 screws with heavy-duty wall
anchors or toggle bolts to support the weight of the UPS Backup Battery System.
a. Use either two holes on the top and two holes on the bottom of the Mounting Plate, or
b. Use one hole on each side of the Mounting Plate (top, bottom, left, and right).
3. Align the slots on the Mounting Plate with the tabs on the UPS Backup Battery System.
4. Push down onto the Mounting Plate to lock it into place.
Connect the UPS Backup Battery System to AC Power and to the MT8733
1. Insert one end of the AC Power Cord into the UPS Backup Battery System and plug
the other end into a nearby AC wall outlet.
2. Ensure the Power Cord is fully inserted into the UPS Power Unit. The System-Status
light on the UPS Backup Battery System should turn green.
3. Unplug the existing DC Power Cord from the back of the MT8733.
4. Plug the green side of the Connecting Cable into the green port on the UPS Backup
Battery System. Ensure the Connecting Cable is fully inserted. [See image 4]
5. Plug the other end of the Connecting Cable into the power jack on the back of the
MT8733 device. Ensure the Connecting Cable is fully inserted. [See image 5]
6. The MT8733 should start to power up after connecting all the cables.
Testing the battery backup operation
See details at www.motorolanetwork.com/BBU-8733
3
4
5
27831-EL-A
Advertisement
