Sealey TB18LEDW Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
Check the battery status, ensure the lights are functioning correctly before using.
9
Please check that each light function works normally before using.
9
When the lights are in storage, check the batteries every 6 months.
9
You must complete the paring process when using replacement & additional lights.
9
Regularly check the lights after long periods of use.
9
2. INTRODUCTION
Magnetic wireless light clusters give essential light functions with no wiring required. Suitable for metal trailers and farming vehicles up to
20m long. Designed and manufactured for trailer, lorry, agricultural machinery, tractor, and other vehicles. EU Plug wiring configurations and
vehicles fitted with a 7-pin plug towing trailers. Three functions: brake, indicator, and tail light. Five functions: brake lights, rear turn signal
lights, rear position lights, license plate lights, and return reflectors. Supplied in storage case.
3. SPECIFICATION
LED Type: ..................................................... 24 x 0.2W SMD
Voltage: ............................................................................12V
IP rating: .........................................................................IP65
Fixing: ......................................................................Magnetic
Working Temperature Range: ........................ -30°C to +50°C
3.1. The battery fitted to this light is considered to be a consumable item and its ability to accept charge will reduce over time. We will
warranty it against mechanical and electrical defect for a period of one year, this does not cover fair wear and tear. If the battery is not
properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will not replace the
battery even if it is less than one year old.
4. INSTALLATION
MOUNTING POSITIONS FOR TRAILER REAR LAMPS AND
Dimensions are in millimetres
All lamps and reflectors should be mounted symmetrically. Trailers over 1.3M wide require at least one rear red fog
lamp, and it must be mounted on the centre line or to the offside of the trailer. If twin rear fog lamps are fitted they
should be mounted symmetrically. Trailers over 1.6M wide require white front reflectors and white front markers/
lamps. Trailers manufactured from October 2012 fitted with brakes require a reversing light. Trailers over 5M long
may require side retro reflectors and side marker lamps. Trailers 6M long and over require red/white side markers.
The above information is given as a guide only; for full details consult:
© Jack Sealey Limited
2PC WIRELESS LED TRAILER LIGHT SET
TB18LEDW
MODEL NO:
REFLECTORS
'The Road Vehicle Lighting Regulations'.
Original Language Version
All lamps must be 'E' marked
TB18LEDW Issue 1 23/06/2021