Section 5 Instructions For Continued Airworthiness; Continued Airworthiness; Cleaning The Kt 74 Transponder - Honeywell BendixKing KT 74 Installation Manual

INSTRUCTIONS FOR CONTINUED AIRWORTHINESS

5.1 Continued Airworthiness

Other than for periodic functional checks required by the regulations, the
KT 74 Mode S/ADS-B Out Transponder has been designed and manufactured to
allow "on condition maintenance". This means that there are no periodic service
requirements necessary to maintain continued airworthiness, and no maintenance is
required until the equipment does not properly perform its intended function. When
service is required, a complete performance test should be accomplished following
any repair action. Repairs should only be carried out in accordance with BendixKing
service agreements.

5.2 Cleaning the KT 74 Transponder

The front panel, buttons and selector knob should be cleaned with a soft cotton cloth
moistened with clean water. The glass fascia covering the LCD screen should be
lightly cleaned with a lint free cloth taking care not to scratch the surface.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
INSTALLATION MANUAL
89000007
SECTION 5
Page 5-1
15 Nov 2013