Toshiba RAS-25N4KVRG-ND Owner's Manual page 7

9.5 FIREPLACE OPERATION
Keep indoor unit's fan blowing continuously during thermo off, to circulate
heat from other sources over the room. There are three setting parameters:
Default setting > Fireplace 1 > Fireplace 2
Fireplace 1:
● During thermo off period, the indoor unit's fan will continue to run by the
same speed, previously selected by end-user.
Fireplace 2:
● During thermo off period, the indoor unit's fan will continue to run at
super-low speed, programmed from factory.
Fireplace Operation Setting
1. Press MENU button for enter menu setting and press TEMP. button to
select FIREPLACE
MENU MEN
°C
2. Enter FIREPLACE set by press MENU button.
triangle mark will stop blink and setting feature will be blink instead.
MENU MEN
°C
3. Select FIREPLACE operation by press TEMP. button.
°C
FIREPLACE 1 FIREPLACE 2
4. Confi rm selected feature by press MENU button again.
MEN MENU
°C
When feature had selected will return to menu selection display triangle mark
will blink
5. Leave from menu setting display by select EXIT.
MEN MENU
°C
Note:
● While Fireplace operation on heating mode, indoor unit fan always runs and
cold air breezing might be occurred.
● Fireplace will operate in Heating mode only.
Blink both triangle and
feature mark Feature not
yet set
None
Blink only triangle Feature
already set
9.6 TIMER OFF OPERATION
To set the timer OFF when the air conditioner is operating.
1. Press MENU button for enter menu setting and press TEMP. button to
select TIMER OFF.
MENU MEN
°C
2. Enter TIMER set by press MENU button.
triangle mark will stop blink and setting feature will be blink instead.
MENU MEN
3. Select TIMER OFF by press TEMP. button.
Can select TIMER OFF from 0.5 - 12hrs.
4. Confi rm TIMER OFF by press MENU button.
MEN MENU
°C
5. Leave from menu setting display by select EXIT.
MEN MENU
°C
Note:
● The setting will be saved for the next same operation.
Cancel TIMER OFF
6. During TIMER OFF already set (no.5) press MENU button and press
TEMP. button to select TIMER OFF.
MEN MENU
°C
7. Press MENU button again will cancel TIMER OFF.
MENU MEN
°C
8. Leave from menu setting display by select EXIT.
MENU MEN
°C
Blink both triangle and
feature mark Feature not
yet set
Blink only triangle
Feature already set
Blink only triangle
Feature already set
Blink both triangle and feature
mark Feature not yet set
EN