Connecting Electrical Supply; Checking The Installation; Customer Service - Bosch NEM5466UC Installation Instructions Manual

Power supply
Model
NEM5466UC
5.2 Connecting electrical supply
WARNING
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being turned
▶
ON accidentally.
To reduce the risk of electrical shock and fire, do not use a
flexible power-supply cord with this appliance. Connect
only to a 3-wire, 120/240-Volt power supply; the neutral
conductor is not required for the operation of the appli-
ance. The voltage at the power supply electrical connec-
tions shall be 150-volts-to-ground or less.
Requirement: The electrical power supply system should
be a 1-phase, 3-wire system with ground connection.
Install a suitable junction box (not furnished).
1.
– An appropriately-sized, UL-listed conduit connector
must be used to correctly attach the conduit to the
junction box.
– The branch-circuit breakers ampacity, the wire sizes
and the connections must conform to the require-
ments of the National Electrical Code or Canadian
Electrical Code and all local codes and ordinances.
Attach the flexible conduit to the junction box. Metal
2.
conduit and leads are factory installed.
Connect the cooktop lead wires to the junction box sup-
3.
ply wires in proper phase.
– black (L1) to black
– red (L2) to red
– green or blank copper wire to ground
240 V AC, 60 Hz system: circuit
breaker
30 Amp
6 Checking the installation

Checking the installation

Check if your unit is working properly after you have com-
Checking the installation
pleted the installation steps.
Before you turn on power supply, make sure all controls
are in the OFF position.
Remove everything from the cooktop surface including
1.
stickers.
Clean the cooktop surface with cooktop cleaning cream.
2.
Switch on the circuit breaker.
3.
Verify that all cooking zones function properly.
4.
7 Customer Service

Customer Service

If you have any questions on use, are unable to eliminate
Customer Service
an issue in the appliance yourself, or the appliance needs
to be repaired, please contact our Customer Service.
With any warranty repair, we will make sure your appli-
ance is repaired by an authorized service provider using
genuine replacement parts. We use only genuine replace-
ment parts for all repairs.
Detailed information on the warranty period and terms of
warranty can be found in the Statement of Limited Product
Warranty, from your retailer, or on our website.
If you contact the Customer Service, you will need the
model number (E-Nr.) and the production number (FD) of
your appliance.
USA:
1-800-944-2904
www.bosch-home.com/us/owner-support/get-support
www.bosch-home.com/us/shop
CA:
1-800-944-2904
www.bosch-home.ca/en/service/get-support
www.bosch-home.ca/en/service/cleaners-and-accessories
Checking the installation en-us
4.3" (110 mm)
5.3" (135 mm)
Fitting/conduit 1" (25 mm)
Conduit approx. 3 feet (900 mm)
Junction box
approx 12" (300 mm)
208 V AC, 60 Hz system: circuit
breaker
30 Amp
WARNING
7