Canon BESTEM-D01R Manual page 8

Preface
■Caution during maintenance work-1
Some of the unit, required for a change over of the product type
are very heavy. So wear protection gloves and use
transportation jigs for the transfer and the installation.
■ Caution during maintenance work-2
● When performing the sensor check, never touch the
sensor with bare hands. Use either tweezers or
papers.
● When performing the maintenance work, the system
should not be operable. Turn off the ON/OFF switch
of the power supply.
● When maintaining air driven parts, switch off the
system input air and the system power then check
that the air pressure dropped down largely to the
same level as the atmosphere.
ｉ
ｉ
4