Table of Contents
Advertisement
Building Networks for People
Network settings
Any change made to this page will make the system restart to validate. Make sure every field is
correctly typed before clicking on
.
To eliminate incautious mistakes during installation, Video Server will stay in installation mode
whenever it starts unless "Reset network at next boot" is disabled. This option can also be
disabled using the Installer program. Once the option is disabled, Video Server will skip
installation at the next boot and the Installer program will not find the installed units. That implies
that Video Server cannot be accessed if no one remembers the IP address, except by restoring
factory default settings. However, with this option disabled Video Server can automatically
operate normally after restarting in case of losing power. This option is ignored in the PPP
connection.
Administrators may modify the network settings to fit into existing networks. Some broadband
service subnet mask may differ from the default value 255.255.255.0 and service providers may
assign some specific network settings. Administrators should change the configuration
according to what is given by the service provider. The configuration may include "IP address",
DVS-301 User Manual v1.00
38
Advertisement
Table of Contents
