4.2
Connecting Cables
The following figure shows the cable connections of the backup battery unit.
Before connecting cables of the backup battery unit, switch off the power of the ONT.
1
3
5
7
To connect the cables, do as follows:
Step 1
Place the battery onto a workbench or mount it onto a wall.
Step 2
Connect the DC output connector of the battery to the power input port of the ONT.
Step 3
Connect the monitoring cable connector of the battery to the BBU port of the ONT.
Step 4
Connect the DC output connector of the charger to the DC IN port of the battery.
Step 5
Connect one end of the AC power cable to the AC input port of the charger.
Step 6
Connect the other end (power plug) of the AC power cable to the power socket.
ONT
Charger
Power plug
DC power cable
2
Battery
4
AC power cable
6
Power socket
8
Battery monitoring cable
7