Table of Contents
Advertisement
Leveling your washer
Excessive noise and vibration can be prevented by
properly leveling the washer.
1.
For free standing installation and with the
washer within 4 feet (1 m) of its final location,
place a level on top of the washer.
2.
Use the universal wrench to adjust the level-
ing legs so the washer is level front-to-rear and
side-to-side, and stable corner-to-corner.
3.
Press down on alternate corners and sides and
feel for the slightest movement. Adjust the
appropriate leg(s) so the washer sits solidly on
the floor on ALL four legs. Keep the leveling leg
extension at a minimum for best performance
of the washer.
NOTE
For pedestal installations, see additional
installation instructions included with the pedestal.
Installation Instructions
raise
lower
9
Hide quick links:
Advertisement
Table of Contents
